COMPLETING THE INSTALLATION
Providing Information for User
ENGLISH
After finishing the installation of the air conditioner, explain the followings to the user:
1How to start and stop the air conditioner
2How to select the modes and functions
3How to adjust the temperature and the fan speed
4How to adjust the airflow direction
5How to set the timers
6How to clean and replace the filters
Note | When you complete the installation successfully, hand over |
| the User’s Manual and this Installation Manual to the user for |
| storage in a handy and safe place. |
Pump Down Procedure (When removing the product)
1Turn on the air conditioner and select Cool mode to run the compressor for 3 minutes.
2Release the valve caps on High and Low pressure side.
3Use L wrench to close the valve on the high pressure side.
4Approximately 2 minutes after, close the valve on the low pressure side.
5Stop operation of the air conditioner.
6Disconnect the pipes.
_IM_30271A_E_11.07.09.indd 23