Samsung AQ24UGAN, AQ09UGDN manual  Figure Description, Top view Side view

Page 6

PREPARING FOR INSTALLATION

Choosing the Installation Location (Continued)

Space Requirements for Outdoor Unit

When installing 1 outdoor unit

Unit : mm

 

When the air outlet is opposite the wall

300 or more

When 3 sides of the outdoor unit are blocked by the wall

300 or more

When the air outlet is towards the wall

1500 or more

The upper part of the outdoor unit and the air outlet is towards the wall

 

or more

2000 or more

1500

 

150 or more

600 or more

The upper part of the outdoor unit and the air outlet is opposite the wall

more

300 or more

500 or

 

When the walls are blocking front and the rear side of the outdoor unit

1500 or more 300 or more

E-6

Figure Description

Top view

Side view

Air intake

 

Air outlet

Air intake

Air outlet

 

, Air flow direction.

CAUTION

If installation is done in inappropriate space, unit may generate sound and cause bad effect on the product.

Installation must be done in level and in a place where vibration will not cause any effect.

Vivaldi_IM_30271A_E_11.07.09.indd 6

2009-11-7 13:55:53

Image 6
Contents Vivaldi IM30271AE11.07.09.indd 2009-11-7 Contents Safety Precautions EnglishMinor personal injury or property Choosing the Installation Location Model Figure Description Top view Side viewWhen installing more than 1 outdoor unit Accessories in the Outdoor Unit Case AccessoriesAccessories in the Indoor Unit Case Following accessories are supplied with the air conditionerFixing the Installation Plate Direction of pipeConnecting the Assembly Cable Model Power cable Interconnection Type GLIndoor unit Outdoor unitOuter Diameter Torque kgfcm DO not Wall UP the Pipe ConnectionPurging the Indoor Unit Cutting or Extending the Pipe Depth a Flaring Size BInstalling and Connecting the Drain Hose of the Indoor Unit Drain hose installationChange the direction only when it is necessary Changing Direction of the Drain Hose Direction of the drained water Installing and Connecting the Drain Hose of the Outdoor Unit You should purge the air in the indoor unit and in the pipe Purging the Connected PipesWith a Global Warming Potential GWP = Reduction of cooling capacity and malfunctionGWP value Add refrigerant charge according to table below If you use a pipe Then 1975Leak Test with Nitrogen before opening valves Performing the Gas Leak TestsTo check for gas leaks on Leak Test with R410A after opening valvesFixing the Indoor Unit in Place Fixing the Outdoor Unit in PlaceFinal Check and Trial Operation Pump Down Procedure When removing the product Providing Information for UserStorage in a handy and safe place Vivaldi IM30271AE11.07.09.indd 2009-11-7 Installation Manual Cooling and Heating
Related manuals
Manual 31 pages 36.44 Kb Manual 32 pages 17.61 Kb Manual 32 pages 60.27 Kb Manual 30 pages 51.71 Kb Manual 32 pages 35.17 Kb Manual 32 pages 6.86 Kb Manual 34 pages 7.54 Kb Manual 32 pages 51.3 Kb Manual 33 pages 37.87 Kb Manual 31 pages 55.87 Kb Manual 31 pages 51.06 Kb