Top Vent - Vertical Termination
No Elbow
V1 = 60 ft. Max. (18.3 m)
V1 = 3 ft. Min. (914 mm)
Note: If installing a vertical vent/ termination off the top of the ap- pliance, the flue restrictor should be used.
V1
Figure 7.7
Flue Restrictor Instructions
1.Remove exhaust shield using a 1/4 inch nut driver by removing the four screws securing it in place (see Figure 7.8).
EXHAUST |
SHIELD |
FLUE |
RESTRICTOR |
Figure 7.8 |
2.Break the flue restrictor into two pieces. Do this by bending the part back and forth until it breaks (see Figure 7.9).
BREAK
HERE
Figure 7.9 Flue Restrictor
30 | Heatilator • |