Heatiator CR36D, CL36D owner manual Listing Label Information/Location, Grate, Number

Page 2

Read this manual before installing or operating this fireplace.

Please retain this owner’s manual for future reference.

Congratulations!

Congratulations on selecting a Heatilator wood burning fireplace. The Heatilator fireplace you have selected is designed to provide the utmost in safety and reliability.

As the owner of a new fireplace, you’ll want to read and carefully follow all of the instructions contained in this owner’s manual. Pay special attention to all cautions and warnings.

This owner’s manual should be retained for future refer- ence. We suggest you keep it with your other important documents and product manuals.

Your new Heatilator wood burning fireplace will give you years of durable use and trouble-free enjoyment. Wel- come to the Heatilator family of fireplace products!

 

Homeowner Reference Information

We recommend that you record the following pertinent

 

 

 

 

 

 

 

information about your fireplace:

 

 

Model Name:

 

 

Date purchased/installed:

 

 

 

Serial Number:

 

 

Location on fireplace:

 

 

 

Dealership purchased from:

 

 

Dealer phone:

 

 

 

Notes:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listing Label Information/Location

The model information regarding your specific fireplace can be found on the rating plate located on the smoke shield of the fireplace.

Serial

Grate

Fireplace

Number

Model

 

FIREPLACE NO.

FIRE DAMAGE. REPLACE MODEL NO.

 

WARNING: RISK OF

 

GRATE WITH HEARTH & HOME

 

TECHNOLOGIES INC.

MODEL NO.

MFG. DATE

FIRECHAMBER INTENDED FOR USE WITH HEARTH & HOME TECHNOLOGIES INC. LISTED FIREPLACE PARTS. SEE INSTALLATION AND OPERATING INSTRUCTIONS FOR THIS MODEL. ONLY HEARTH & HOME TECHNOLOGIES INC. GLASS DOOR KITS CAN BE INSTALLED ON THIS UNIT.

FIREPLACE ALSO FOR USE

YES

IN MANUFACTURED HOMES

 

NO

CLEARANCE TO

CHIMNEY

FIREBOX

COMBUSTIBLES:

2 IN. MIN.

 

IN.

MIN.

FAN KIT

 

 

&

 

 

 

 

RATED AT

 

 

 

MODEL NO.

 

 

 

 

 

 

115 VOLTS, 50/60 Hz.,

 

AMP.

 

 

 

 

 

 

 

 

 

 

 

 

 

DO NOT OVERFIRE. USE ONLY: SOLID WOOD FUEL OR

 

WARNING! THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED

 

 

 

LISTED DECORATIVE GAS APPLIANCE. DO NOT USE A

 

GAS LOG SET. TO REDUCE THE RISK OF FIRE OR INJURY, DO NOT

 

FIREPLACE INSERT OR OTHER PRODUCTS NOT

 

 

 

INSTALL AN UNVENTED GAS LOG SET INTO FIREPLACE.

 

SPECIFIED FOR USE WITH THIS PRODUCT. IF DOORS

 

WARNING! THIS APPLIANCE IS NOT FOR USE AS COOKING EQUIPMENT.

 

ARE USED OPERATE FIREPLACE WITH DOORS FULLY

 

 

OPEN OR CLOSED ONLY. WHEN BURNING A

 

 

 

 

 

 

 

 

 

 

 

 

IF INSTALLATION OR OPERATING INSTRUCTIONS ARE MISSING

 

DECORATIVE GAS APPLIANCE IN THE FIREPLACE,

 

 

 

CONTACT: HEARTH & HOME TECHNOLOGIES INC.,

 

 

ADJUST DAMPER TO THE FULLY OPEN POSITION.

 

 

 

 

 

 

 

 

1915 W. SAUNDERS ST., MT. PLEASANT, IA 52641.

 

 

 

 

 

 

 

 

 

 

 

Note: An arrow (Î) found in the text signifies change in content.

2

Heatilator • CL36D, CR36D • 12538 • Rev V • 05/09

Image 2
Contents Fire Risk Wood Burning FireplaceHot screen/mesh and glass doors will cause burns Number Listing Label Information/LocationGrate User Guide Table of ContentsInstaller Guide Limited Warranty Heatilator CL36D, CR36D 12538 Rev V 05/09 Non-Combustible Materials Listing and Code ApprovalsAppliance Certification Combustible MaterialsHot glass will cause burns Operating InstructionsYour Fireplace Grate Seasoned WoodStarting a Fire FirescreenVented Gas Log Sets & Gas Log Lighters Glass DoorsOutside Air optional Optional ComponentsWood Fuel Hardwood vs SoftwoodDisposal of Ashes Maintenance and ServiceChimney Inspection/Cleaning Inspect Grate Glass CleaningCheck Firebox Refractory Frequency As desiredTroubleshooting Guide Start Fire Problems Possible Cause SolutionGetting Started Typical Fireplace SystemNegative Pressure Design and Installation ConsiderationsDraft Locating Fireplace & Chimney Frequently open doors Central heat outlets or returnsInspect Fireplace and Components Tools and Supplies NeededFireplace System Requirements Framing & Clearances Select Fireplace LocationClearances Clearances to Combustible MaterialsSidewalls/Surrounds Mantel Leg or Wall ProjectionsFrame the Fireplace RequiredPosition the Fireplace Installation of FireplaceThings to Consider Place Protective Metal Hearth StripsYES Install Outside Air Kit Outside Air InstallationChimney Assembly Chimney Requirements Height of Chimney ComponentsUsing Offsets/Returns ExampleAssemble Chimney Sections Install Chimney Air KitInstall Ceiling Firestops Install Attic Insulation Shield Mm overlapCut out Hole in Roof Complete InstallationInstall Flashing Chimney Termination Requirements Flat RoofsChase Installations Construct the ChaseInstall Termination Cap Install Fireplace & ChimneyInstall Chase Top ST375 Square Termination Cap Field Constructed Shrouds ShroudsRadiation Shield Mailbox Style Shroud radiation shield required = 1/k x inches of thickness FinishingHearth Extension Finishing Material In. Micore or equivilent insulationCombustible Mantel Mantel50 deg 16 3/4 in. Minimum 14-1/2 39 deg 18 in. Min Wood Burning Inserts AccessoriesGas Log/Lighter Provision Gas Code, Ansi Z223.1Fireplace Dimensions Reference MaterialsChimney Components Catalog #14-1/2 10-7/8 276 mm Service Parts CL36DParts Contact Information
Related manuals
Manual 48 pages 44.09 Kb