Heatiator CL36D, CR36D owner manual Chimney Components, Catalog #

C. Chimney Components

The following pictures show only those chimney components which may be safely used with this fireplace.

CAK4A		Chimney Air Kit
ID4		Insulated Duct/Outside Air
UD4		Uninsulated Duct/Outside Air
SL306		Chimney Section - 6 in. (152 mm) long
SL312		Chimney Section - 12 in. (305 mm) long
SL318		Chimney Section - 18 in. (457 mm) long
SL324		Chimney Section - 24 in. (610 mm) long
SL336		Chimney Section - 36 in. (914 mm) long
SL348		Chimney Section - 48 in. (1219 mm) long
SL3		Chimney Stabilizer
SL315		Chimney Offset/Return - 15 deg
SL330		Chimney Offset/Return - 30 deg
FS338		Ceiling Firestop - Straight
FS339		Ceiling Firestop - 15 deg
FS340		Ceiling Firestop - 30 deg
AS8		SL300 Straight Attic Insulation Shield, 24 in. (610 mm)
JB877		Chimney Joint Band
CB876		Chimney Bracket
RF370		Roof Flashing - Flat to 6/12 Pitch
RF371		Roof Flashing - 6/12 to 12/12 Pitch
TR344		Round Termination Cap
TR342		Round Telescoping Termination Cap
ST375		Square Termination Cap
TS345		Square Termination Cap
TS345P		Square Termination Cap - Painted
TCT375		Terra Cotta Termination Cap
CT35		Chase Top
LDS33		Decorative Shroud - 3 ft x 3 ft (.91 m x .91 m)
LDS46		Decorative Shroud - 4 ft x 6 ft (1.22 m x 1.83 m)
LDS-BV		Decorative Shroud - 26 in. x 26 in. (660 mm x 660 mm)
		Field Constructed Shrouds (See “Woodburning
		Termination Cap”)
CT-3A		Adapter - May be used with the following copper caps
				CT-King
				CT-Queen
			CT-Bishop-I
			CT-Bishop-II
			CT-Knight-I
				CT-Pawn
		12 in.		12 in.
				(305 mm)
	(305 mm)
5-1/4 in.
(133 mm)				4 in. (102 mm)
	10-1/2 in.
	(287 mm)

ID4 Insulated Duct

4 in. (102 mm) i

42 in.

(1067 mm)

UD4 Uninsulated Duct

			4 in. (102 mm) i
	42 in.
	(1067	)
		A
8 in.				10-1/2 in.
				(267 mm)
(203 mm)
		B
	Chimney Sections
	A			B
Catalog #	in	mm	in	mm
SL306	6	152	4-3/4	121
SL312	12	305	10-3/4	273
SL318	18	457	16-3/4	425
SL324	24	610	22-3/4	578
SL336	36	914	34-3/4	883
SL348	48	1219	46-3/4	1187

A = Actual Length

B = Effective Length (length of

chimney part after it has

been snapped to another)

		Inside
20-3/4 in.		Diameter
		8 in.
(527 mm)	(203 mm)
4-3/4 in. (121 mm)		Outside
		Diameter
Effective Height		10-1/2 in.
		(267 mm)

CAK4A Chimney Air Kit SL3 Vent Stabilizer

Heatilator • CL36D, CR36D • 12538 • Rev V • 05/09 43