Black to Black
White to White
Ground to Ground
One Motion Sensing Light
Ground to Ground
Black to Black
White to White
Two Motion Sensing Lights (Working Independently)
Other Wiring Options
This fixture can be wired to control another standard or motion sensing light fixture(s). See the following wiring diagrams for proper connections.
Note: All wiring should be run in accordance with the National Electrical Code through conduit or another acceptable means. Contact a qualified electrician if there is any question as to the suitability of the system.
When controlling an additional light fixture(s), the maximum wattage of the motion sensor on this fixture should be observed. See illustration below for an example of a maximum lamp wattage load calculation.
| Maximum Lamp |
| Wattage Rating |
| for Light Fixture – |
| 100 Watts |
Maximum Load for | CONTROLLING Fixture |
Motion Sensor – |
|
200 Watts | Maximum Lamp |
| |
| Wattage Rating |
| for Light Fixture – |
| 100 Watts |
| CONTROLLED Fixture 1 |
| TOTAL Load for |
| Motion Sensor – |
| 200 Watts |
IMPORTANT: When determining the maximum lamp wattage rating of the fixture to be controlled, refer to the maximum lamp wattage label on the fixture and not the wattage rating on the lamp(s) currently installed in the fixture.
Black to Black
|
|
|
|
|
|
|
|
|
|
|
| Red to Black |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| White to White |
|
|
|
|
|
|
|
|
|
| Ground to |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Ground |
Motion Sensing Light Standard Light Fixture
Wiring Motion Sensing Light to Control Standard
Fixture
Ground to Ground | Black to Red | |
Black to Black | ||
and Black | ||
Red to Black | ||
| ||
White to White |
|
Motion Sensing Light | Controlled Motion |
| Sensing Light |
Wiring Motion Sensing Light to Control Another
Motion Sensing Light