Figure 8.5 Install the vent pipe adapter with gasket or high-temp silicone to the rear vent opening.
Figure 8.6 Place the grille gently into the opening on top of the appliance.
E. Leg Leveling System
Figure 8.8 Thread Allen bolts through nuts until fl ush.
NOTE: Two Allen bolts and two nuts are included in the component bag. Normally, only one is required on the leg not touching the fl oor.
Figure 8.9 Slide assembled nuts and bolts into slots on legs with the nuts on the bottom.
D. Baf e Installation/Adjustment
BAFFLE
BAFFLE RETAINERS
Figure 8.7 Position baffl e on top of baffl e retainers on left and right sides. Centering baffle on retainers, ensure that the dark painted bevelled edge and darker painted baffl e bottom side faces toward the front viewing area of the fi rebox. Bend the center tabs up to prevent the baffl e from sliding out.
Figure 8.10 Use a 5/32 in. 4mm) Allen wrench to adjust legs up and down to desired level.
Page 30 |
| July 29, 2008 |