F. Positioning the Logs
While still breakable, the logs do not become fragile until after the appliance is burned and they have cured. After curing, any handling must be done with care as breakage can easily occur.
PLEASE NOTE: Logs have been designed to work specifically with the burner of this appliance. Exact placement will ensure proper operation of your gas appliance and reduce sooting.
Notch
G. Mineral Wool
WARNING
Explosion Risk.
•Follow ember placement instructions in manual.
•Do NOT place embers directly over burner ports.
•Replace ember material annually.
Improperly placed embers interferes with proper burner operation.
#1
Location Pins
Figure 8.11 Position rear log (#1) over the two locating pins.
#2
Figure 8.12 Put right front log (#2) into place on burner. Lean log back towards rear log until it fi ts into notch in rear log.
#1
#3
#2
Figure 8.14 Place individual pieces of embers in front of and around the gas log where they can be seen. Space them so that gas can contact them on all sides. Avoid stacking the embers on top of each other.
NOTE: Do not block gas ports.
H. Opening Front Door
The front door is held closed by a magnet. To open the door, pull gently from the right side as you face the appliance.
Figure 8.13 Place left front log (#3) into place on burner.
July 29, 2008 |
| Page 31 |