8 Appliance Setup
A. Remove Shipping Materials
Remove shipping materials from inside or underneath the firebox.
B. Top to Rear Vent Conversion
KIT CONTENTS: Rear vent grille.
TOOLS REQUIRED: Power drill; #2 Phillips
Figure 8.1 Remove top trivet, if installed. Remove vent pipe adapter and gasket. If gasket breaks, apply high-tempera- ture silicone to the bottom of the adapter before installing as indicated in Figure 8.6.
Figure 8.3 Remove rear valve cover shield. Remove rear access plate and gasket. Save the screws.
CAUTION
Sharp Edges
•Wear protective gloves and safety glasses during installation.
Figure 8.4 Place cover plate and gasket over top vent and attach with the eight screws previously removed.
Figure 8.5 Insert inner collar adapter to rear vent flue.
Figure 8.2 Remove inner collar adapter
January 3, 2007 |
| Page 29 |