RD. Service Parts List (cont’d.)
TOPAZ
(NG, LP) Exploded Parts Diagram | Beginning Manufacturing Date: |
| Ending Manufacturing Date: |
IMPORTANT: THIS IS DATED INFORMATION. The most current information is located on your dealer's VIP site. When ordering, supply serial and model numbers to ensure correct service parts.
Item |
| Part Description | Part # |
# |
| Alphabetical Order |
|
2 | Face Assembly, Solitaire, Powder Coat (specify color - see chart on page 50) | See chart on page 50 | |
1 | Face Assembly, Quartet, Matte Black |
| |
1 | Face Assembly, Quartet, Porcelain (Must specify color - Mahogany or Crème) | ||
1 | Face Assembly, Quartet, Powder Coat Creme |
| |
1 | Face Assembly, Quartet, Powder Coat Linden Green | ||
| Face, Matte Black |
| |
| Face, Porcelain (specify color - see chart on page 50) | See chart on page 50 | |
| Face, Powder Coat (specify color - see chart on page 50) | See chart on page 50 | |
| Flex Line 3/8 COMP x 30 in. |
| |
| Flex Line 3/8 Flare x 22L |
| |
| Gasket, Cover Plate |
| |
| Gasket, Elbow |
| |
| Glass Assembly |
| |
22 | Grille, Rear Vent, Matte Black |
| |
22 | Grille, Rear Vent, Porcelain Crème |
| |
22 | Grille, Rear Vent, Porcelain Mahogany |
| |
22 | Grille, Rear Vent, Porcelain Midnite Blue |
| |
22 | Grille, Rear Vent, Powder Coat Crème |
|
|
22 | Grille, Rear Vent, Powder Coat Linden Green |
|
|
22 | Grille, Rear Vent, Powder Coat Sienna Bronze |
| |
22 | Grille, Rear Vent, Powder Coat Willow |
|
|
23 | Grille, Top Vent, Matte Black |
| |
23 | Grille, Top Vent, Porcelain |
| See chart on page 50 |
23 | Grille, Top Vent, Powder Coat |
| See chart on page 50 |
| Hinge Assembly |
| |
| Hinge Pin, Gold |
| |
| Hinge Pin, Nickel |
| |
20 | Igniter, Piezo |
| |
| Injector, Pilot, EZ, LP, 35 |
| |
18 | Knob, Extension, Valve, HI/LO |
| |
17 | Knob, Extension, Valve, ON/OFF |
| |
| Latch, Draw |
| |
| Leveling Assembly |
| |
7 | Log Set |
| |
| Magnet, Round |
| |
| Mineral Wool |
| |
| ON/OFF Valve |
| 15697A |
| Orifice, LP, (.073) |
| 24220 |
| Orifice, NG |
| 24691 |
January 3, 2007 | Page 49 |