Figure 8.24
Locater Pins
Figure 8.20 Insert locator pin into right front log. Insert rear log onto log pan over stud.
Place left twig over locator pins on the rear log and the left front log. To complete your log set applica- tion reinstall the glass and the front of the unit.
Figure 8.21 Insert locator pin into left front log. Place left front log on burner in the grooved provided on the burner surface.
Figure 8.22 Insert locator pin into right front log. Place right front log on burner in the grooves provided on the burner surface.
Figure 8.23 Place right twig over the locator pins on the rear log and the right front log.
H. Mineral Wool
WARNING
Explosion Risk.
•Follow ember placement instructions in manual.
•Do NOT place embers directly over burner ports.
•Replace ember material annually.
Improperly placed embers interferes with proper burner operation.
Figure 8.25 Place individual pieces of embers in front of and around the gas log where they can be seen. Space them so that gas can contact them on all sides. Avoid stacking the embers on top of each other.
NOTE: Do not block gas ports.
January 3, 2007 |
| Page 33 |