en
Cleaning the floor roller (see fig. 41)
(not required with the AirTeQ floor tool)
Release the roller pin using a coin.
Push and take out the roller axle.
Take out the roller.
Remove all threads, hair etc. and reinstall the roller and lock the roller pin.
When to change the thread catcher of the standard floor brush
The thread catcher on the standard floor brush can be replaced when the pile is worn out.
Replacing the thread catchers (see fig. 42 + 43)
Use a screwdriver or similar object to remove the thread catchers from the slots.
Insert the new thread catchers.
New thread catcher pads can be purchased from any authorized Miele vacuum dealer or Miele.
Cleaning and care
Turn off the vacuum and unplug it from the outlet before performing any maintenance work.
Vacuum cleaner and accessories
The vacuum cleaner and other plastic accessories can be cleaned with a damp cloth or a cleaner suitable for plastics.
Do not use abrasive,
Dust compartment
The dust compartment can, if necessary, be cleaned using a dry cloth, dusting brush or a second vacuum to remove any dust.
Monitor the filter bag change indicator and inspect all filters regularly. Clean or replace them when necessary according to these Operating Instructions.
Do not submerge the vacuum in water. If moisture gets into the appliance there is the risk of an electric shock.
19