Napco Security Technologies GEM-P3200 System Options Address 2420 2422, 3874, 3905, 3880

WI818G 10/05								Page 35
		SYSTEM OPTIONS (ADDRESS 2420 - 2422, 3874, 3905, 3880 -3881)
	2420	System Options			2421	System Options
	Default			Option	Default			Option
	OFF		1	Disable System Trouble Audible (at Keypad) †	OFF		1	Automatic Interior Bypass/Easy Exit
	OFF		2	Chime on Lug E4	OFF		2	Veri-phone Zones trip Aux. Output
	OFF		3	Disable Code required for Func. Mode Lvl. 1	OFF		3	Veri-phone Zones Priority over Alarms
	OFF		4	Disable Code required for EZ Bypass	OFF		4	AuxOut Chirp on Keyfob Arm/Disarm**
	OFF		5	Disable Keypad Instant Button	OFF		5	Disable Auxout Clear on Disarm
	OFF		6	Enable Telephone Line-Fault Test	OFF		6	2nd Call Answering Machine Override
	OFF		7	Disable AC Fail Detection	OFF		7	Disable Zone Fault Scrolling (Auto Status)
	OFF		8	Telco Fail only when Armed	OFF		8	Veri-phone Zones trip Fire Output
				† NOTE: Not for UL Installations.

**Default for this address contingent on EZ Menu selections.

2422	System Options
Default			Option
ON		1	Pulse Burg Output Cadence§
OFF		2	Wireless Smoke Low Battery Resound
OFF		3	Supervised Alarm Output
OFF		4	Enable Smoke Detector Dirty Trouble
OFF		5	Disable Area Entry Relays
OFF		6	Disable Exit/Entry Urgency Tone at Keypad
OFF		7	Select Bell Output on Keyfob Arming
OFF		8	Enable Burg. Output on Telco Fail only when Armed

§In Zone Options, Fire Zones, and only Fire Zones, must be programmed for pulse alarm output.

SYSTEM OPTIONS:

1.Select the desired option entering the option number (1-8) for each digit.

2.Enter corresponding option number in address location.

NOTE: Dark shaded data value box shows option not available. Press Uor Dto save.

3874	System Options
Default			Option
OFF		1	Enable GEM-PRINT
OFF		2	Enable Cancel Report to Telco 3
OFF		3	Wireless Trouble to Telco 1
OFF		4	Wireless Trouble to Telco 3
OFF		5	Enable Set Time/Date Message	SYSTEM
OFF		6	RESERVED
ON		7	Enable Keypad Time/Date Display
		8	RESERVED
				OPTIONS
3905	System Options
Default			Option
OFF		1	RESERVED
OFF		2	Enable Exit Delay Restart (SIA-FAR)**
OFF		3	Enable Bell on Exit Error**
OFF		4	Enable Report Exit Err/Recent Close**
OFF		5	Digital Dialer Rpt Enter/Exit Test Mode**
OFF		6	Enable CP-01 Limits**
OFF		7	Disable Call Waiting on First Attempt
OFF		8	Enable Ambush in User Assignment Code Type

**Default for this addresses contingent on EZ Menu selections.

ALARM/TROUBLE REPORTING CODES (ADDRESS 3880 - 3881)

ALARM/TROUBLE	ADDRESS 3880-3881
REPORTING CODES
Wireless Supervisory	3880
Wireless Tamper	3881

[Default = blank (•) from address 3880-3881]

ALARM/TROUBLE REPORTING CODES:

1.Enter in corresponding address location (left and right digits).

NOTE: Left digit is the first digit and right digit is the second digit in a two digit CS receiver format.

2.Valid entries are: 1-9, 0 and B-F.

NOTE: A is not permitted.

3.To disable a code leave boxes blank (•).

4.Press Uor Dto save.

LNAPCO Security Systems XGEM-P3200 Programming Instructions