WI818G 10/05 | Page 51 |
STEP 5: RELAY EVENT CONDITION OPTIONS: timeout type for each.
5A. Select Alarm Type and Timeout Type from Table 5A (below); enter in corresponding address location (left digit). NOTE: Select Timeout from Step 3.
5B. Select Activation from from Table 5B (below); enter in corresponding address location (right digit).
TABLE 5A
RELAY EVENT
ALARM TYPE OPTIONS
LEFT DATA | ALARM | TIMEOUT |
ENTRIES | TYPE | TYPE |
blank (•) | Burglary | Minutes |
1 | Fire | Minutes |
4 | Day Zone | Minutes |
8 | Burglary | Seconds |
9 | Fire | Seconds |
C | Day Zone | Seconds |
TABLE 5B
RELAY EVENT
ACTIVATION CONDITIONS
RIGHT DATA ENTRIES | OPTIONS |
1Alarm
2Restore
3Trouble
4Trouble Restore
5Follows Open Zone
6Follows Shorted Zone
NUMBER OF RELAY BOARD MODULES (ADDRESS 3777)
EXTERNAL
ADDRESS 3777
Number of Relay | LEFT | RIGHT |
Board Modules | blank (•) |
|
[Default = blank (•) blank (•)] |
| |
DATA | Relay Board Module(s) | |
|
| |
RIGHT |
| |
blank (•) |
|
|
| None | |
11
22
33
RELAY BOARD MODULES: Up to 3 External Relay Board Modules (RM3008) may be programmed.
1.Select the number of relay modules from the table shown.
2.Enter in corresponding right digit address location shown (left digit is not used).
RELAY CONTROL
LNAPCO Security Systems |