OPERATION
To set the operation mode
●Operation mode setting
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
| AUTO | COOL DRY | FAN | HEAT |
● Room temperature setting |
|
|
| |
| Press the SET TEMP. buttons to set the room temperature. | |||
| Temperature setting range |
| 64 to 88 °F | |
| AUTO | ................................................ | ||
| COOL/DRY | 64 to 88 °F | ||
Lower | HEAT | ................................................ | 60 to 88 °F | |
Rise |
|
|
| |
●Fan speed setting
Press the FAN button to set the fan speed.
AUTO HIGH MED LOW QUIET
ECONOMY OPERATION
Press the ECONOMY button to start or stop ECONOMY OPERA-
TION.
For details on the function, refer to page 11.
Room temperature sensor selection
●This function is locked at the factory. In order to detect the room temperature correctly, consult author- ized service personnel when using this function.
Indoor unit
Press the ECONOMY button for more than 2 seconds to se- lect whether the room temperature is detected at the indoor unit or the remote controller.
When the 
thermo sensor display appears, the room temperature is detected at the remote controller.
NOTES
•If this function is locked, the location where the room temperature is detected cannot be changed and the 
mark flashes when the ECONOMY button is pushed for 2 seconds or more.
9/6/2010 10:36:26 AM