22 en Install the Detector Heads | F220 Series Detectors with |
|
|
4.1.3Detector Head
CAUTION! The mounting skirts and detector heads are
!keyed. Do not force them onto the mounting bases.
Install:
Install the detector head by lining up the LED on the detector head (refer to Figure 4.2, Item 6 on page 21) with the bar on the mounting skirt (refer to Figure 4.2, Item 7). Turn the detector head clockwise until the LED aligns with the T mark on the mounting skirt (refer to Figure 4.2, Item 8).
Remove:
Remove the detector ahead by turning it
2
1
1.Insert screwdriver through the locking port and depress the locking bar.
2.Hold the locking bar down while turning the head
Fig. 4.3 Unlocking the Locking Bar
F.01U.029.847 | Installation Manual | Bosch Security Systems, Inc. |