Bosch Appliances F220-B6RS 2 F220 Series Detector Features, 3 F220 Series Heat Detector Heads

Page 6

6 en General Information

F220 Series Detectors with F220-B6RS Bases

 

 

2.2.2F220 Series Detector Features

15

2

6

3

4

1. Front of detector

4. Unlocking port

2.Light-emitting diode (LED) 5. Back of detector

3. Thermistor

6. Chambermaid location

(heat detectors only)

 

Fig. 2.2 Detector Features

2.2.3F220 Series Heat Detector Heads

The F220 Heat Detector Heads can be identified by color coding (refer to Table 2.2).

F220-135 No circle around the thermistor

F220-135F A gray circle around the thermistor

F220-190F A black circle around the thermistor

Table 2.2 Distinguishing Heat Detectors

WARNING! The F220-135, F220-135F and F220-190F are

! not life safety devices. Use them with F220-B6 Series bases to provide general property protection.

F.01U.029.847 -01 2007.02

Installation Manual

Bosch Security Systems, Inc.

Image 6
Contents F220 Series Detectors with F220-B6RS Base Required Maintenance and Testing LegalTrademarks General Information Compatible Control PanelsBase Features F220 Series Detectors About F220 Series Detector Heads2 F220 Series Detector Features 3 F220 Series Heat Detector HeadsTechnical Specifications General Specifications4 F220 Series Smoke Detector Heads Detector Specifications Install the BasesBase Specifications Electrical SupervisionPage Terminal Connections Wire the BasesLoop Wiring Specifications EOL ResistorsWire Optional Remote Annunciators Wire F220-B6RS Sounder BasesFour-wire Loop Termination NAC Configurations Local Configurations F220-B6RS Local Configuration DIP Switch Settings D275 Wire Power Supervision Modules Wire F220-B6E Power Supervision BaseF220-B6E Wire D275 Power Supervision Module D275Install the Detector Heads Mount the Detector HeadsOptional Locking Bar LED Detector Head Keyed. Do not force them onto the mounting basesTest Mode Sensitivity ModeSet Detector Modes Set CleanMe Feature Flash Rate and Trouble IndicationTest the Installation Inspect the InstallationActivate an Alarm at Each Detector Reset the Control PanelTest Each Detector Test the Alarm Loop Perform Nfpa 72 Required TestingTest any CO Sensors USA