5 Framing and Clearances
A. Selecting Appliance Location | NOTICE: Illustrations reflect typical installations and are | |
When selecting a location for the appliance it is important to | FOR DESIGN PURPOSES ONLY. Illustrations/diagrams | |
are not drawn to scale. Actual installation may vary due to | ||
consider the required clearances to walls (see Figure 5.1). | ||
individual design preference. | ||
WARNING! Risk of Fire or Burns! Provide adequate | ||
| ||
clearance around air openings and for service access. |
| |
Due to high temperatures, the appliance should be locat- |
| |
ed out of traffic and away from furniture and draperies. |
|
A
E
254 mm | D* |
| |
A | ALCOVE |
B | INSTALLATION |
C | TOP VENT |
| ONE 90º ELBOW |
TOP VENT
ONE 90° ELBOW
B
F
| A | B | C | D* | E | F | |
Inches | 48 | See Section D. | |||||
Figure 5.5 & 5.6 | |||||||
|
|
|
|
|
| ||
Millimeters | 1350 | 1220 | 1910 | See Section D. | 490 | 450 | |
Figure 5.5 & 5.6 | |||||||
|
|
|
|
|
|
Figure 5.1 Appliance Locations
Heat & Glo • | 19 |