Top Vent - Vertical Termination
No Elbows
V1 Max= 13.4 m ( 44 ft.)
Note: If installing a vertical vent/termination off the top of the appliance, the optional exhaust restrictor may be needed.
Note: Use SLP Series |
components only. |
V1 |
Figure 7.5 Vertical Vent Maximum |
Exhaust restrictors are recommended for these vertically terminated products which have excessive draft. Exhaust restrictors will compensate for high draft. and restore vi- sual flame height. If the vent configuration has a total ver- tical of
Exhaust Restrictor Instructions
1.Locate the inner firebox exhaust restrictor. Figure 7.6.
2.Remove restrictor for
Figure 7.6 Standard Restrictor
3.Replace existing restrictor with small
Figure 7.7 Restrictor with Small Cut-Out
Heat & Glo • | 27 |