Heat & Glo LifeStyle 6000C manual Slp-Trap, DVP-2SL, Slp-Wt-Bk

B. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8 in. (203 mm)

Heat

Shield

15-1/8 in.

(384 mm)

	Max
12 in.	Effective
(305 mm)	Length

SLP-TRAP

Horizontal Termination Cap

Term Cap	Minimum	Maximum
	Effective Length	Effective Length
Trap1	3-1/8 in.	4-3/4 in.
	79 mm	121 mm
Trap2	5-1/4 in.	9-1/4 in.
	133 mm	235 mm

6-3/8 in.	4-3/16 in.
163 mm	106 mm
4 in.	4-5/8 in.
102 mm	117 mm
8-1/8 in.	5-1/16 in.
206 mm	128 mm

DVP-2SL

Adapter

26in.

660mm

DVP-HSM-B

Extended Heat Shield

14-7/16 in.

367 mm

14-7/16 in.		2-5/16 in.
			59 mm
	367 mm

SLP-WT-BK

Wall Thimble-Black

Figure 16.9 SLP Series Vent Components

Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev. T • 9/12 79