Heat & Glo LifeStyle 6000 XLS, 6000 GDVFL manual Venting with Two 90 Elbows

Page 13

VENTING WITH TWO (2) 90° ELBOWS

V

H

H + H1

1´ MIN. (305 mm)

2´ MAX. (610 mm)

6´ MAX. (1.86 m)

2´ MIN. (610 mm)

4´ MAX. (1.22 m)

12´ MAX. (3.72 m)

3´ MIN. (914 mm)

6´ MAX. (1.86 m)

18´ MAX. (5.58 m)

4´ MIN. (1.22 m)

8´ MAX. (2.48 m)

24´ MAX. (7.74 m)

20´ MAX. (6.2 m)

8´ MAX. (2.48 m)

24´ MAX. (7.74 m)

 

 

(20´ (6.2 m) CANADA)

Figure 8. Venting with Two 90° Elbows

 

10

Image 13
Contents Heat-N-Glo Fireplace Safety and Warning Information Replacement Parts Table of ContentsHigh Altitude Installations Installation CodesApprovals and Codes CodesGetting Started Diagram of the6000 Series Step Installing the FireplaceLocating FireplaceModel Models Step Framing Fireplace26-1/4 Vent System Approvals Step Installing Vent System DV-90D Corner Installation Venting with One 90 Elbow Venting with Two 90 Elbows Venting with three 90 elbows Attach the First Vent Component to the Starting Collars Installing Vent ComponentsContinue Adding Vent Components Adding Venting Components Install Support BracketsInstalling Support Brackets 4. Install Firestops 12 Hole and Vent Pipe 11 Hole and New Framing Members Attic Firestop Vent TerminationRound and Trapezoid Termination Caps If Exterior Walls are Finished with Major U.S. Building Codes Minimum Height from Roof to Lowest Discharge Opening Step Gas Control Systems Step Positioning Leveling, Securing FireplaceStanding Pilot Ignition System Direct Spark Ignition DSI SystemMm hook-up at the unit Step Gas Supply LinePressure Natural Gas Propane Step Gas Pressure RequirementsFor Standing Pilot Ignition Wiring Step Wiring FireplaceOptional Accessories Remote Wall SwitchFan Wiring Diagram For Direct Spark Ignition DSI WiringStep Finishing Direct Spark Ignition DSI Wiring DiagramInstalling the Trim Step Installing Trim Logs, Ember MaterialHearth Extensions Save the log instructions with this manual Positioning the LogsPlacing the Ember Material Glass Assembly Review safety warnings and cautions Step Before Lighting Fireplace After InstallationDouble-check for faulty components Double-check for gas leaksMaintaining and Servicing Your Fireplace Fireplace MaintenanceBurner Flame Patterns Standing Pilot Only Replacement Parts AccessoriesDSI Ignition Only 20 X Both Standing Pilot and DSI Ignition6000XLS 20 X Models Mesh