Vermont Casting SDV30 manual Wall Centerline from Floor, Wall and Ceiling Clearances

Stardance Direct Vent/Natural Vent Gas Heater

Parallel Installation: Minimum Clearance

and Flue Centerline, Direct Vent and

Natural Vent

	C
	L
	C
D	A
	C
	L

B

			ST128b
Stove Clearances:	A: 4” (102 mm)
	B: 4”		(102 mm)
Pipe Centerlines:	C:	15¹⁄₂” (395 mm)
	D:	9”	(229 mm)

Fig. 3 Parallel installation, minimum back and side clear- ances, and flue centerlines.

Corner Installation:

Minimum Clearance and Flue Centerline,

Direct Vent and Natural Vent

B

A

B

	A		ST129b
Stove Clearance:		A:	4” (102 mm)
Pipe Centerline:		B:	14¹⁄₂” (370 mm)

Fig. 4 Corner installation, minimum corner clearance and flue centerline.

Wall Centerline from Floor

Direct Vent Only

A

	ST131b
Effective Minimum
Wall Thimble	56” (1480 mm) (CFM Pipe)
Centerline	52” (1378 mm) (Simpson Duravent Pipe)

Fig. 5 Minimum wall thimble centerline.

Wall and Ceiling Clearances

D

B

C

A

	ST101b
A: Rear Wall	4” (102 mm)
B: Min. Clearance	45¹⁄₄” (1154 mm)*
C: Min. Alcove Height	72” (1830 mm)
D: Max. Alcove Depth	48” (1220 mm)
Sidewall Clearance	4” (102 mm)

Fig. 5 Dimensions and clearances to ceiling or alcove.

Hearth Requirements

The Stardance Heater must be installed on rigid floor- ing. When the heater is installed directly on any com- bustible surface other than wood flooring, a metal or wood panel extending the full width and depth of the unit must be used as the hearth. There are no other hearth requirements.

6 20007065