INSTALLATION
9)Connect the red wire from the thermodisc to the red wire of the speed control wire harness.
10)Connect the live black wire from power cord to the black wire of the speed control wire harness.
11)Slide the thermodisc into the bracket clip on the underside of the firebox.
NOTE: Pull excess wire next to fan to avoid excessive heat from the firebox.
12) Ensure all wires are pulled away from firebox to avoid excessive heat and secure with
13)
NOTE: When power cord is plugged in, speed control is in the ON position and stove is burning, allow 10 - 15 minutes for the thermodisc (temperature switch) to activate and turn on the Fan automatically.
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three pronged (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded
8 | Waterford TARA T25 Direct Vent Freestanding Gas Stove |