Waterford Appliances T25-LP Planning Your venting Installation, For your particular installation

INSTALLATION

RESIDENTIAL AND MANUFACTURED HOMES / MOBILE HOMES

MINIUMUM HORIZONTAL TERMINATION INSTALLATIONS

Planning Your venting Installation

See page 9 for Exterior Vent Termination requirements. The T25 is approved for a minimum horizontal termination with the Regen- cy Riser Vent Kit. See the diagram for minimum and maximum pipe lengths.

When planning your installation, it will be nec- essary to select the proper length of vent pipe for your particular requirements. Determine the minimum clearance to combustibles from the rear of the unit to the wall. It is also important to note the wall thickness. Before cutting the vent hole through the wall ensure that ALL vent and termination clearances (see page 10) will be met.

The venting arrangements shown on the dia- gram, have a minimum of 75% (flue loss) efficiency with Fan Off, as required for man- ufactured homes. (Actual efficiency may be as high as 85%.)

*If this is an outside corner, the minimum dis- tance between the vent and the outside corner is 6" (15cm). See "F" on the diagram on page 10.

NOTE: Ensure compliance with the outside vent terminal location before cutting hole as both dimensions must be met.

You will require the following components with your new Regency Rear Vent Direct Vent Freestanding Gas Stove. Please review your product to make sure you have everything you need. In the event that you are missing any part, contact your dealer.

Decorative brass or chrome trim kits are available from Simpson Dura-Vent for their wall thimbles, as well as a square

wall thimble cover.

Note: These are the minimum pieces re-
quired. Other parts may be required
for your particular installation.
Minimum components for a Horizontal Installation:
640-944	Horizontal Termination Kit which includes:
	1	946-201	6-5/8" Dia. x 18" Black Pipe
	1	946-207	4" Dia. x 18" Aluminum Vent
	1	946-202	Wall Penetration Heat Shield (Wall Thimble) (2 pcs)
	1	640-530	Riser Vent Terminal
	1	640-545	Decorative Wall Trim (Black)
	1	948-128	Tube Mill-Pac
945G*	1	45o Elbow	Screws
946-219	1 Adapter
Optional Components:
946-204		45o Elbow - 6-5/8" Black pipe
		and 4" Aluminum Vent
946-205		Vinyl Siding Shield for Riser Vent
		Terminal
946-208/P		Vent Guard
940		Square Wall Thimble Cover*

981Snorkel Termination (36")*

982Snorkel Termination (14")*

942Wall Penetration Heat Shield*

* Simpson Dura-Vent components

Waterford TARA T25 Direct Vent Freestanding Gas Stove 11