MAINTENANCE
4)Disconnect both sources of power; the power cord, located on the 7) Disconnect the spark cable and valve sensor wires from the control
left hand side of the fi rebox and the wires connected to the | board. | |
battery located on the right side of the fi rebox. |
|
|
Backup | Power |
|
Battery |
| |
Receptacle |
| |
|
| |
MAINTENANCE
5)Remove the control box by carefully lifting off the velcro and sliding it out from the side of the fi rebox.
6)Disconnect the wire harnesses from the control board labelled A, C, D, E & F. Do not disconnect the the jumper cables labelled B.
F
8)Remove the cable tie from control box to release the wires. Do not discard cable tie.
9)Remove the Ground screw from the control box.
10)Replace the control box.
11)Reverse steps 9 to 1. When
A C D E
Jumper Cable 'B'
DO NOT REMOVE
38 | Regency® L900E Direct Vent Gas Fireplace |