Nortec Industries GS Series specs

Figure # 9

Co-venting Application Using B Vent Only

UL Listed Cap

Required

B type double wall vent with double wall connectors is required for category I, serving two or more gas appliances.

Exhaust venting outlet

Condensate

Tee

Steam Outlet

Condensate tee and trap must be installed. Take the condensate to a floor drain or a condensate pump.

Trap

Category I gas appliance uses B type venting. Follow local and/or national codes for venting installation.

Note: These are guidelines only. Follow local and/ or national codes in your respective area.

For any vent lengths over 20 feet long, insulate the vent pipe to reduce the amount of condensate that could form in the flue gases.

When the venting passes through a cold area, or location that has large amounts of air passing over the venting, it should be insulated to prevent condensation from forming inside the venting.

Vent pipe passing through walls, floors, and ceilings, must be installed with the proper clearances from combustible materials, and venting manufactures fire stop equipment.

The venting shall not pass through any circulation air duct or plenum.

WARNING: Provide a screen or barrier to prevent personal injury in areas where personnel may come into contact with hot vent pipes.

A drip “T” or flue box condensate port should be used for condensate removal. When a condensate drain is used it will be necessary to install a trap to prevent flue gases from escaping.

-9 -

Install a trap with a minimum 12” standing water column.

Prior to activating the appliance, ensure that the trap is filled with water and that the drain terminates in accordance with local plumbing codes.

Never vent into a unlined masonry or concrete chimney.

Chimney or vent should extend at least 3’ (1 m) above a roof and at least 2’ (.6 m) above any ridge within 10’ (3 m) of the chimney. Local codes apply.

Install venting so as to prevent accumulation of condensate and have a means for condensate removal.

Plastic, PVC, CPVC and HTPV special gas vents are not approved for use with this appliance.

The vent must terminate at a sufficient height above the roof to prevent blockage by expected snowfall.

GS Series specifications

Nortec Industries has established itself as a leader in the field of industrial automation, particularly with the introduction of its GS Series. This series is designed to cater to the needs of a diverse range of industries, providing advanced solutions for modern manufacturing challenges. The GS Series embodies a perfect blend of technology, precision, and versatility, designed to enhance productivity and efficiency.

One of the standout features of the GS Series is its modular design. This allows for easy customization and scalability, making it a suitable choice for businesses of any size. Users can configure their systems to meet specific operational requirements, ensuring that they get the most out of their investment. The modularity of the GS Series enables companies to start small and expand their operations as needed without extensive overhauls.

Another key characteristic of the GS Series is its incorporation of cutting-edge technologies. This series leverages artificial intelligence and machine learning algorithms to optimize production processes. These technologies enable the system to learn from real-time data, making adjustments that can significantly boost efficiency and reduce waste. Furthermore, the GS Series features advanced sensors and automation tools that allow for precise monitoring and control of manufacturing processes, ensuring that quality standards are consistently met.

The GS Series is also built with robust connectivity options, allowing for seamless integration with existing enterprise systems. This interoperability is crucial in today’s fast-paced business environment, where data-driven decision-making is key to maintaining a competitive edge. The ability to connect with Internet of Things (IoT) devices enhances the flexibility of the GS Series, enabling manufacturers to gather and analyze data from multiple sources for more informed operations.

Safety features are paramount in the design of the GS Series. Nortec Industries prioritizes the well-being of its operators by incorporating numerous safety protocols and fail-safes within the system. These features not only comply with industry standards but also ensure that operations can continue without interruptions caused by safety concerns.

In summary, Nortec Industries' GS Series represents a significant advancement in industrial automation. With its modular design, integration of AI and machine learning, robust connectivity, and inherent safety features, the GS Series is poised to drive efficiency and productivity across various sectors. Companies looking to enhance their manufacturing capabilities would find the GS Series an invaluable asset in navigating the complexities of modern production environments.