12 / English, PRE-OPERATIONAL Checklist

Nilfisk-ALTO 5400, 4800, 4300 12 / English, PRE-OPERATIONAL Checklist, Main Broom, Scrub Brushes

A-12 / ENGLISH

PRE-OPERATIONAL CHECKLIST

Before Each Use:

*Inspect the machine for damage, oil or coolant leaks.

*Squeeze the rubber dust cup on the Engine Air Filter (8) to release built-up dust.

*Check the engine coolant level (23).

*Check the engine oil level (45).

*Check the hydraulic oil level (36).

*Check the Fuel Gauge (DD) on the gasoline, and diesel models.

*Check the Fuel Gauge located on the LP tank (5) for propane model.

*Check the Air Filter Service Indicator (46).

In the Driver’s Seat:

*Be sure that you understand the operating controls and their functions.

*Adjust the seat to allow easy reach of all controls.

*Insert the Master Key and turn the Ignition Key Switch (MM) to the ON position. Check for proper operation of the Horn (B), Hour Meter (PP) and Headlights (D). Turn the Ignition Key Switch (MM) OFF.

*Check the Parking Brake Latch (GG). The latch must hold its (locked parked) setting rmly with out easily being released. (Report all defects immediately to service personnel).

Plan Your Cleaning in Advance:

*Arrange long runs with a minimum of stopping or starting.

*Allow 6 inches of broom path overlap to ensure complete coverage.

*Avoid making sharp turns, bumping into posts, or scraping the side of the machine.

MAIN BROOM

Several different main brooms are available for this machine. Contact your Nilsk-Advance dealer if you need help selecting th e best broom for the surface and litter that you will be sweeping. Note: Reference broom maintenance for installation steps.

SCRUB BRUSHES

1Remove side skirt assemblies for easier access. NOTE: Loosen large black knob at the front of each skirt mounting bracket, slide the skirt assembly forward and lift straight UP and off scrub deck.

2See Figure 1. Make sure that the Lug Locking Latch is in the Unlatched Position (A).

3Slide the scrub brush under the Brush Mounting Plate (B) and lift it so that the lugs (C) on the brush block pass through the holes in the plate.

4Rotate the brush into the Installed Position (D) according to rotation directions shown in gure 2 and then rotate the locking latch back into the Latched Position (E).

TOP VIEW OF BRUSH MOUNTING PLATE

FIGURE 1

A-12- FORM NO. 56041580 - Captor™ 4300, 4800, 5400 / CR 1100, 1200, 1400

4800, 4300, 5400 specifications

Nilfisk-ALTO, a recognized leader in cleaning equipment, has developed a range of high-performance industrial vacuums to meet the demanding needs of various industries. Among these models are the Nilfisk-ALTO 5400, 4800, and 4300, each offering distinctive advantages while sharing a robust foundation built on efficiency, durability, and cutting-edge technology.

Starting with the Nilfisk-ALTO 5400, this model is engineered for heavy-duty applications and provides exceptional suction power thanks to its advanced turbine system. With a large capacity for collecting waste materials, the 5400 is particularly adept at handling fine dust and debris in environments such as construction sites and manufacturing facilities. The integrated filtration system not only ensures efficient dust containment but also extends the lifespan of the vacuum by minimizing clogging.

Moving to the Nilfisk-ALTO 4800, this model strikes a balance between performance and versatility. It features a compact design making it easy to transport, while still delivering powerful suction for a wide range of applications. The 4800 is equipped with an effective HEPA filter that captures 99.997% of particles larger than 0.3 microns, ensuring compliance with strict air quality standards. Additionally, its user-friendly controls and ergonomic features enhance operator comfort during prolonged use.

The Nilfisk-ALTO 4300 is designed with smaller spaces in mind, yet offers a surprising level of performance. This model is perfect for light to medium-duty tasks, with an efficient motor that provides solid suction power without excessive noise. It is particularly suitable for cleaning in offices, schools, and retail spaces where disruption needs to be minimized. The 4300’s compact size allows for easy maneuverability and storage, making it an ideal choice for team environments and smaller cleaning crews.

All three models integrate advanced technologies such as the innovative DustGuard filtration system and an easy-to-clean design, which significantly reduces maintenance time and enhances overall operational efficiency. Their construction with durable materials ensures longevity, making them reliable investment choices for businesses focused on maximizing productivity while maintaining a clean and safe working environment.

In conclusion, the Nilfisk-ALTO 5400, 4800, and 4300 are exemplary industrial vacuums that cater to diverse cleaning needs, confirming Nilfisk-ALTO's commitment to quality, innovation, and customer satisfaction.