14 / English | Nilfisk-ALTO 4300, 5400, 4800 guide

Nilfisk-ALTO 4300, 5400, 4800 manual 14 / English

A-14 / ENGLISH

FILLING THE SOLUTION TANK

The solution tank ll (3) is located at the left rear corner of the machine and has a 75 gallon (284 liter) capacity. Fill the tank with the proper dilution of cleaning chemical mixed with water according to the manufacturer’s recommendations.

If using a powdered chemical, mix it with water in a bucket before putting it into the machine’s solution tank. NOTE: DO NOT ll the tank past the Maximum Level on the Water Level Gauge (50). NOTE: AXP/EDS machines can either be used conventionally with detergent mixed in the tank or the AXP/EDS detergent dispensing system can be used. When using the AXP/EDS detergent dispensing do not mix detergent in the tank, plain water should be used.

CAUTION!

Use only low-sudsing, non-ammable, non-caustic cleaning chemicals intended for machine application.

FUEL

WARNING!

•ALWAYS STOP THE ENGINE BEFORE FILLING THE FUEL TANK.

•DO NOT SMOKE WHILE FILLING THE FUEL TANK.

•FILL THE FUEL TANK IN A WELL-VENTILATED AREA.

•DO NOT FILL THE FUEL TANK NEAR SPARKS OR OPEN FLAME.

•USE ONLY THE FUEL SPECIFIED ON THE FUEL TANK DECAL.

On machines with diesel and gasoline engines, a decal near the ller neck (4) shows the proper fuel to use in the machine. Before removing the cap from the tank, wipe all dust and dirt from the cap and from the top of the tank to keep the fuel as clean as possible.

On machines with propane engines, a decal near the tank gives specic information about the proper type of tank to be used on the machine.

DIESEL ENGINE

Fill the tank with Number 2 Diesel Fuel if the machine will be used in an area where the temperature is 30° Fahrenheit (0° Celsius) or higher. Use Number 1 Diesel Fuel if the machine will be used in an area where the temperature is below 30° Fahrenheit (0° Celsius).

NOTE: If the diesel machine runs out of fuel completely, the fuel system must be bled before the engine can be re-started. To avoid this situation, ll the fuel tank when the fuel gauge indicates 1/4 tank. Fuel tank capacity is 11 gallons (42 liters).

GASOLINE ENGINE

FILL THE TANK WITH UNLEADED 87 OCTANE REGULAR GASOLINE. FUEL TANK CAPACITY IS 11 GALLONS (42 LITERS).

Note: Reference the separately supplied engine manufacture’s maintenance and operator manual for more detailed engine specica tion and service data.

PROPANE ENGINE

Mount a standard 33 lb. liquid withdrawal propane tank on the machine, connect the fuel hose and open the shutoff valve on the tank. Wear gloves when connecting or disconnecting the fuel hose. Shut the propane tank service valve OFF when the machine is not in use.

A-14- FORM NO. 56041580 - Captor™ 4300, 4800, 5400 / CR 1100, 1200, 1400

revised 11/07

4800, 4300, 5400 specifications

Nilfisk-ALTO, a recognized leader in cleaning equipment, has developed a range of high-performance industrial vacuums to meet the demanding needs of various industries. Among these models are the Nilfisk-ALTO 5400, 4800, and 4300, each offering distinctive advantages while sharing a robust foundation built on efficiency, durability, and cutting-edge technology.

Starting with the Nilfisk-ALTO 5400, this model is engineered for heavy-duty applications and provides exceptional suction power thanks to its advanced turbine system. With a large capacity for collecting waste materials, the 5400 is particularly adept at handling fine dust and debris in environments such as construction sites and manufacturing facilities. The integrated filtration system not only ensures efficient dust containment but also extends the lifespan of the vacuum by minimizing clogging.

Moving to the Nilfisk-ALTO 4800, this model strikes a balance between performance and versatility. It features a compact design making it easy to transport, while still delivering powerful suction for a wide range of applications. The 4800 is equipped with an effective HEPA filter that captures 99.997% of particles larger than 0.3 microns, ensuring compliance with strict air quality standards. Additionally, its user-friendly controls and ergonomic features enhance operator comfort during prolonged use.

The Nilfisk-ALTO 4300 is designed with smaller spaces in mind, yet offers a surprising level of performance. This model is perfect for light to medium-duty tasks, with an efficient motor that provides solid suction power without excessive noise. It is particularly suitable for cleaning in offices, schools, and retail spaces where disruption needs to be minimized. The 4300’s compact size allows for easy maneuverability and storage, making it an ideal choice for team environments and smaller cleaning crews.

All three models integrate advanced technologies such as the innovative DustGuard filtration system and an easy-to-clean design, which significantly reduces maintenance time and enhances overall operational efficiency. Their construction with durable materials ensures longevity, making them reliable investment choices for businesses focused on maximizing productivity while maintaining a clean and safe working environment.

In conclusion, the Nilfisk-ALTO 5400, 4800, and 4300 are exemplary industrial vacuums that cater to diverse cleaning needs, confirming Nilfisk-ALTO's commitment to quality, innovation, and customer satisfaction.