English / A-25, Squeegee Maintenance | Nilfisk-ALTO 4800, 5400, 4300

Nilfisk-ALTO 4800, 5400, 4300 manual English / A-25, Squeegee Maintenance

ENGLISH / A-25

SQUEEGEE MAINTENANCE

After each use, clean the squeegee tool and check the blades for damage. If the squeegee leaves water in the middle of its path or at both ends of its path, it probably needs to be adjusted. Reverse or replace the blades if they are cut, torn, wavy or worn.

To adjust the squeegee:

1Park the machine on a level oor, lower the squeegee and drive forward a short distance.

2 See Figure 6. Loosen the two Squeegee Adjustment Lock Nuts (A).

3 Turn the two Squeegee Adjustment Bolts (B) counter-clockwise for forward tilt or clockwise for backward tilt. Pull forward a short distance after each adjustment to see if the squeegee blades touch the oor evenly across the entire width of the squeegee too l. Then re-tighten the two Nuts (A). NOTE: Hold Bolts (B) with wrench while tightening Lock Nuts (A). If adjusting for more forwards tilt, tightening the Locknuts (A) after loosening the Adjustment Bolts (B) is what will actually tilt the squeegee assembly.

To reverse or replace the rear squeegee blade:

1Unlatch the Rear Squeegee Blade Latch (C) and remove the (2) Wing Nuts (D).

2Remove both Rear Straps (E) and the Rear Squeegee Blade (F) from the machine.

3The squeegee blade has 4 working edges. Turn the blade so a clean, undamaged edge points toward the front of the machine. Replace

the blade if all 4 edges are nicked, torn or worn to a large radius.

4Install the blade, following the steps in reverse order and adjust the squeegee tilt.

To reverse or replace the front squeegee blade:

1 Disconnect the Squeegee Hose from the squeegee tool.

2 Loosen the (2) Squeegee Levers (G) and slide the squeegee assembly off of the squeegee mount.

SERVICE NOTE: Depending on the position of the Squeegee Lever Handle (H), you may not be able to rotate the lever far enough to loosen or tighten depending on which you are trying to do. In this case, simply lift UP on the Handle (H) and rotate the lever in the direction necessary to acquire adequate turning space and then allow the lever to drop back DOWN into place on the hex. You can then either tighten or loosen as needed.

3 Remove all of the Wing Nuts from the front squeegee blade strap.

4Remove the strap and blade from the squeegee assembly.

5The squeegee blade has 4 working edges. Turn the blade so a clean, undamaged edge points toward the front of the machine. Replace the blade if all 4 edges are nicked, torn or worn to a large radius.

6Install the blade, following the steps in reverse order and adjust the squeegee tilt.

FIGURE 6

revised 5/05

FORM NO. 56041580 - Captor™ 4300, 4800, 5400 / CR 1100, 1200, 1400 - A-25

4800, 4300, 5400 specifications

Nilfisk-ALTO, a recognized leader in cleaning equipment, has developed a range of high-performance industrial vacuums to meet the demanding needs of various industries. Among these models are the Nilfisk-ALTO 5400, 4800, and 4300, each offering distinctive advantages while sharing a robust foundation built on efficiency, durability, and cutting-edge technology.

Starting with the Nilfisk-ALTO 5400, this model is engineered for heavy-duty applications and provides exceptional suction power thanks to its advanced turbine system. With a large capacity for collecting waste materials, the 5400 is particularly adept at handling fine dust and debris in environments such as construction sites and manufacturing facilities. The integrated filtration system not only ensures efficient dust containment but also extends the lifespan of the vacuum by minimizing clogging.

Moving to the Nilfisk-ALTO 4800, this model strikes a balance between performance and versatility. It features a compact design making it easy to transport, while still delivering powerful suction for a wide range of applications. The 4800 is equipped with an effective HEPA filter that captures 99.997% of particles larger than 0.3 microns, ensuring compliance with strict air quality standards. Additionally, its user-friendly controls and ergonomic features enhance operator comfort during prolonged use.

The Nilfisk-ALTO 4300 is designed with smaller spaces in mind, yet offers a surprising level of performance. This model is perfect for light to medium-duty tasks, with an efficient motor that provides solid suction power without excessive noise. It is particularly suitable for cleaning in offices, schools, and retail spaces where disruption needs to be minimized. The 4300’s compact size allows for easy maneuverability and storage, making it an ideal choice for team environments and smaller cleaning crews.

All three models integrate advanced technologies such as the innovative DustGuard filtration system and an easy-to-clean design, which significantly reduces maintenance time and enhances overall operational efficiency. Their construction with durable materials ensures longevity, making them reliable investment choices for businesses focused on maximizing productivity while maintaining a clean and safe working environment.

In conclusion, the Nilfisk-ALTO 5400, 4800, and 4300 are exemplary industrial vacuums that cater to diverse cleaning needs, confirming Nilfisk-ALTO's commitment to quality, innovation, and customer satisfaction.