Integra DTR-7.4 instruction manual Display the main menu, Hardware Setup menu appears, Minimum

Selecting the Appropriate Setting forYour Connections

Master Volume

On

Standby

TV

Input

DVD

Video 1

Video 2

Video 3

Video 4

Video 5

Tape

Tuner

Phono

CD

Net Audio

1

2

3

+

VCR 1

VCR 2

@. - ' /

ABC

DEF

TV CH

-

4

5

6

DTR-7.4

GHI

JKL

MNO

7

8

9

PQRS

TUV

WXYZ

TV VOL

+10

0

Clear

--/---

Direct Tuning

Custom

Macro

Zone 2

Mode

Input

Dimmer

Sleep

TV

pMenu

Men

Input

To

Audio

u

+

ADJ

Setup/Enter/Return/

CH

Enter

VOL

Disc

-

Exit

Guide

Cursor

/

/

/

R

eturn

p

Setu

Di

l

M ti

Hardware Setup

In this section, you will perform the initial settings for the following scenarios.

•When the impedances for speakers connected to the DTR-7.4 are between 4 and 6 Ω (See page 18).

•When connecting speakers to the ZONE 2 SPEAKERS terminals (See page 66).

•When operating the remote controller using the IR IN terminal (See page 69).

•When you want to fix the TV Format setting to PAL or NTSC (Australian model only).

Note:

The settings within the Hardware Setup Menu will need to be made before you use your DTR-7.4 for the first time. Once you have selected one of the Hardware Setup menu items, the setting will not be displayed again when you enter the Basic Menu. To change the setting at a later date, select the Advanced Menu to display the Hardware Setup Menu.

Advanced Menu
0.Hardware Setup
1.Speaker Setup	0.Hardware Setup
2.Input Setup
3.Audio Adjust
4.Preference	1.Speaker Impedance
5.Network Setup
→Basic Menu	2.Surr Back/Zone2
	3.Remote Setup
	4.TV Format
[ENTER]Quit:[SETUP]
	[ENTER]Quit:[SETUP]

If you want to perform these operations using the remote controller, first press the scroll wheel.

1 Display the main menu.

Press the Setup button on the front panel, or press the scroll wheel and then press the Setup button on the remote controller to display the main menu on the monitor and front display.

2	Use the	and	cursor buttons to select
	“0. Hardware Setup” and then press the
	Enter button.
	The “Hardware Setup” menu appears.
3	Use the	and	cursor buttons to select
	an item and then press the Enter button.
4	Use the	and	cursor buttons to select
	an item and then use the and cursor
	buttons to set the desired value.
5	Press the Setup button to exit the Setup
	menu.

Press the Return button to return to the previous menu.

Speaker Impedance Sub-menu

Use this sub-menu to set the impedance level of the DTR-7.4 to match the specifications of the speakers you are using.

0-1.Speaker Impedance

a.Minimum :6 ohms

Quit:[SETUP]

a. Minimum

6 ohms (default): Select when the impedances of all speakers are between 6 and 16 Ω.

4 ohms: Select when the impedance of even one speaker is between 4 and 6 Ω.

Note:

Before you change this setting, be sure to first lower the volume at the DTR-7.4 to the minimum level.

30