Integra Complete Guide to Recording Audio and Video with the DTR-7.4
Page 51

Recording a Source—Continued

Recording the Video from One Source and the Audio from Another

You can add the sound from one source to the video of another source to make your own video recordings. Below is an example of recording the sound from a com- pact disc player connected to CD IN and the video from a video camera connected to Video 5 Input to video cas- sette tape in a video cassette recorder connected to the VIDEO 1 OUT jack.

The illustrations used here represent the DTR-7.4.

1

Press the CD input source button.

 

 

CD

Notes:

•If you change the input source during recording, you will record the audio signals from the newly selected input source and the video signals assigned to that input source.

•You cannot record the surround effects.

Enjoying Music and Movies

2

Setup

Enter

Return

Set “VIDEO 5” for the Video setting in the Video Setup sub-menu of the Setup menu: Input Setup → Video Setup → Video.

Basic Menu

2.Input Setup Input:CD

2-3.Video Setup

Input:CD

a.Video

:VIDEO5

b.Component Video :INPUT1

Quit:[SETUP]

3

 

Insert a CD in the CD player and

 

 

 

 

insert a tape in the video camera

 

 

connected to the Video 5 Input.

 

 

 

4

 

Insert a video tape for recording in

 

 

 

 

the video cassette recorder con-

 

 

nected to VIDEO 1 OUT.

 

 

 

5

 

Press the Rec Out button repeat-

 

 

 

 

edly until “Rec Sel:SOURCE”

 

Rec Out

appears in the front display.

 

 

Now “CD” has been selected as the audio

 

 

input source and “VIDEO 5” as the video

 

 

input source.

 

 

 

6

 

Start recording on the video cas-

 

 

 

 

sette recorder and start playing at

 

 

the CD player and video camera as

 

 

desired.

 

 

 

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents DTR-7.4 Important Safety Instructions Precautions Table of Contents Table of Contents Supplied Accessories FeaturesRemote control sensor DTR-7.4 Standby indicator Before Using the DTR-7.4Installing the Batteries Using the Remote ControllerProtective caps Index Parts and FacilitiesFront Panels Protective capsIndex Parts and Facilities Rear Panel Front Panel DisplayZone 2 OUT Digital IN/OUTPRE OUT 18, 25 AntennaAmp Mode Remote ControllerRemote Controller Attach the FM antenna, as shown Connecting AntennaConnecting the AM Loop Antenna Connecting the Indoor FM AntennaConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna How to use speakers About HomeTheaterEnjoying Home Theater Important Points Regarding Speaker Placement Speaker PlacementConnecting Speakers Using the Speaker Cable LabelsSpeaker channels are colored as follows AV Cables and Connectors TV,PB projector Etc.PR Connecting to Audio/Video EquipmentConnecting a Television Monitor or Projector Monitor OUT flow of the video signals is as followsDVD player Connecting to Audio/Video EquipmentSatellite tuner, television, or settop box Digital device DVD recorderGround wire earth Connecting a Compact Disc Player CDConnecting Video Camera, etc. Video 5 Input Connecting a Turntable PhonoUSA and Canadian models Australian model Connecting the Power Cords from Other DevicesCenter speaker Connecting Auxiliary Power AmplifierSurround back right speaker Surround rightPower off function Connecting -compatible AV ComponentsConnections for Remote Control Power on/ready functionTurning on the Power from the Remote Controller Connecting the PowerTurning on the Power Connecting the Supplied Power CordAdvanced Setup MenuBasic MenuΜNavigating Through the Setup Menu Setup MenuSpeaker Impedance Sub-menu Hardware SetupHardware Setup menu appears Display the main menuSelecting the Appropriate Setting for Your Connections Remote Setup Sub-menuSurr Back/Zone 2 Sub-menu Speaker Setup Changing the Remote Controller’s Control IDTV Format Sub-menu Speaker Distance Sub-menu Speaker Config Sub-menuLevel Calibration Sub-menu Use the and cursor buttons to select LeftPress the cursor button again To Change the Display of the Input Source from Tape to MD Configuring Input Settings Suitable for Your ConnectionsConfiguring Input Settings Suitable for Your Connections Input SetupDigital Setup Sub-menu When NET AUDIO, FM, or Digital Format Initial settings for each input sourceComponent Video Multichannel Setup Sub-menu When NET AudioVideo Setup Sub-menu VideoYour DTRTemporarily turning off the sound Listening with headphonesEnjoying Music or Videos with the DTR-7.4 Basic OperationTemporarily Changing the Speaker Output Levels Using the Sleep Timer remote controller onlyAdjusting the brightness of the front display Enjoying Music or Videos with the DTR-7.4DTR-7.4Press the Display button on Switching the displayDTR-7.4 or the remote controller Dialog normPress the scroll wheel and then Changing the audio modeAdjusting the bass and treble Input source you want to setListening Modes Using the Listening ModesUsing the Listening Modes Selected for input Selecting the Listening ModeSelect the input source Start playback on the device youRelationship between input source and listening mode THX Changes the listening mode to the THX listening modeSpecifying Radio Stations by Frequency Tuning Into a Radio StationListening to a stereo radio station FM mode Listening to Radio BroadcastsListening to Radio Broadcasts Presetting a Radio StationSelecting a preset radio station Erasing a preset radio stationRecording a Source Recording a Source Input source you want to name Input Setup BasicSelect 2. Input Setup and then Labelling the Input Source Character InputInput Setup Basic Adjusting the Bass and Treble Sound Tone Control Audio Adjust BasicSetting the Various Sound Effects Sound Effect Audio Adjust BasicPress the Setup button to return to the main menu Input Setup AdvancedPress the scroll wheel, and then press the Setup button Input Setup and then press the EnterAudio Adjust Advanced Input Setup AdvancedAdjusting the Audio Delay Delay Sub-menu Mono Sub-menu Audio Adjust AdvancedSetting the Low Frequency Effect Levels LFE Level Detailed Settings for Each Listening ModeSurround Sub-menu Theater-Dimensional Sub-menuPro Logic II Music Panorama Pro Logic II Music DimensionDolby Digital EX Dolby D DTS-ESTHX Sub-menu Preference Advanced Volume Setup Sub-menuPreference Advanced Adjusting the Headphone Volume Level Headphones LevelSetting the Background Color for OSD OSD Setup Switching the OSD PositionConnecting to Devices with Analog Multichannel Output Setup for Multichannel OutputEnjoying Analog Multichannel Audio Playback Playing Analog Multichannel Audio Changing the listening modeUsing the tone control Enjoying Analog Multichannel Audio PlaybackUsing Only Speakers in Zone Connecting ZoneUsing a Receiver/Integrated Amp in Zone Using a Power Amp in ZoneEnjoying Music in the Remote Zone Performing the Settings for the Remote Zone ZoneEnjoying Music in the Remote Zone Output to the IR OUT terminal If Remote Controller Signal Does not Reach Other ComponentsSetup Menu See From connecting block Mini plug cable DTR-7.4Using the Remote Controller with Radio Frequency Press the Input button, and then roll Using an External Device with 12V Trigger TerminalConnecting to an External Device with 12V Trigger Terminal Configuring the 12V Trigger TerminalEnjoying Net Audio FeaturesInternet radio features Net-Tune FeaturesInternet radio Network Audio Server Modem To the WAN side Connecting the DTR-7.4 to Your Ethernet NetworkEnjoying Net Audio InternetJKL Play Button Mode button 80Number/letter buttons CH/Disc buttonNetwork Setup Menu IP Address Sub-menu Proxy Setup Sub-menuPress the Input button, Input Setup MenuMAC Address Sub-menu Client Sub-menuSelect Server Playback OSD Display Sub-menuPlayback OSD Display Enjoying Internet Radio Presetting Internet radio stations Choosing a preset Internet radio stationErasing a preset Internet radio station While either the Input button nor Mode button is illuminatedTurn on the Network Audio Server Turn on the DTR-7.4Playing a music file repeatedly Selecting a track listUse Buttons to select one From the menu Playing a music file at randomOperating Onkyo Products Using the Remote Controller Operating Onkyo Products Using the ConnectionDVD Mode Operating Onkyo Products Using the Remote Controller CD Mode Previous/Next / buttonsFR/FF / buttons Select the next track MiniDisc ModeMode button Eject button Current track. The NextTape Mode Rewind/FF / buttonsReverse Play button Using the Remote Controller with Other Components Entering a Remote Control CodeRemote Control Codes for an Onkyo DVD player SAT satellite receiver Using the Remote Controller with Other ComponentsRemote Control Codes DVD DVD PlayerJBL Following buttons control the DTR-7.4 Controlling a Satellite Receiver Controlling a VCRControlling a TV Controlling a Cable Receiver Standby TV CH +TV VOL Learning Commands from Another Remote Controller Making Macros Using MacrosNaming Macros Editing Remote Controller ModesAdding New Remote Controller Modes Running MacrosDeleting Remote Controller Modes Type of mode you want to add,Reordering the Remote Controller Modes Mode before which you want toAssigning Remote Controller Modes Resetting the Remote ControllerSymptoms Causes Remedies Troubleshooting GuideAM and FM stations Troubleshooting Guide101 If One of the Messages Shown Below Appears Amplifier Section Specifications104
Top Page Image Contents