Integra DTR-7.4 instruction manual Using Macros, Making Macros

Using the Remote Controller with Other Components—Continued

Using Macros

With the Macro function you can program the remote controller to perform a sequence of actions with one press of a button. For example, normally you need to perform the following actions to use a CD player that’s connected to the DTR-7.4:

1.Press the scroll wheel, (to select AMP mode).

2.Press the On button (to turn on the DTR-7.4).

3.Roll the scroll wheel to select CD (to select the CD remote controller mode and the CD input source).

4. 4. Press the Play	button (to start the CD
player).

With the Macro function you can program the remote controller to do all of this with one press of a button.

Making Macros

You can make up to eight macros, and each macro can perform up to eight actions.

1	Press and hold the Custom button
Custom	for more than three seconds.
	The remote controller enters Custom
	mode.
2	Roll the scroll wheel to select
	“MACRO,” and then press the
	scroll wheel.

3	Roll the scroll wheel to select
	“EDIT,” and then press the scroll
	wheel.

4	Roll the scroll wheel to select a
	macro, and then press the scroll
	wheel.
	Macros are numbered from 1 to 8.

5	On the remote controller, press the
	buttons whose actions you want to
	program into the macro in the
	order you want them performed.
	To program the CD example in the left
	column into a macro: press the scroll
	wheel, press the On button, roll the
	scroll wheel to select CD, press the
	scroll wheel, and then press the Play
	button.
	Actions are numbered from 1 to 8.
		Macro #1 selected
		8 actions learnt
	After each button is pressed, “SET” fol-
	lowed by “KEY” is displayed.
	To add an action that selects an input
	source for the main room or Zone 2,
	press the Input button or Zone 2 button,
	respectively, roll the scroll wheel to
	select the input source, and then press
	the scroll wheel.
6	When you’ve finished, press the
	Macro button.
Macro	After the following appears on the dis-
	play, the display returns to normal.

Remote Controller

Macro #1 selected

Action #1

95