Integra DTR-7.4 instruction manual IP Address Sub-menu, Proxy Setup Sub-menu

Page 77

Enjoying Net Audio—Continued

IP Address Sub-menu

You can use this submenu to turn on/off the DHCP and Auto IP functionality.

Also, you can use this menu to manually configure net- work settings. Referring to the documentation from your ISP, enter the IP address and subnet mask assigned to your DTR-7.4 as well as the IP addresses of the default gateway and DNS server.

After the necessary settings are complete, press the Return button to go back to “5. Network Setup Menu,” select “Save Settings, ” and press the

Enter button to save the setting you made.

When you set a. DHCP/AUTO IP to Off, select a menu item under b. and press the Enter or button; the DTR-7.4 will enter the number-entry mode.

Select a number using the / buttons, and press the Enter button to enter the number.

After all the necessary numbers are entered, the DTR-7.4 exits the number-entry mode.

5-1.IP Address

 

 

a.DHCP/AUTO-IP

:On

b.IP Address

 

 

 

:192.168.

9.

10

c.SUBNET Mask

 

 

:255.255.255.

0

d.Gateway

 

 

 

:192.168.

9.

1

DNS Server

 

 

 

e.1st:192.168.

9.

1

f.2nd:

0.

0.

0.

0

a. DHCP/AUTO IP

Sets whether the network setting is configured automat- ically or not.

On: The network setting will be configured automati- cally. When you set this option to On, the values for b. through f. will be assigned using DHCP.

Off: The network setting is configured manually.

b. IP Address

You will enter this value when you set the a. DHCP/ AUTO IP setting above to Off.

Enter the IP address assigned to your DTR-7.4. If your DTR-7.4 is directly connected with an xDSL modem or terminal adapter, be sure to enter the static IP address exactly as specified by your ISP.

Specify the IP address within the range below. The Net- work Audio cannot be used with IP addresses out of the ranges below.

CLASS A: 10.0.0.0–10.255.255.255

CLASS B: 172.16.0.0–172.31.255.255

CLASS C: 192.168.0.0–192.168.255.255 Because the most of the commercially available routers are set to a CLASS C IP address, specify a CLASS C IP address for the DTR-7.4.

c. SUBNET Mask

You will enter this value when you set the a. DHCP/ AUTO IP setting above to Off.

Enter the subnet mask. If your DTR-7.4 is directly con- nected with an xDSL modem or terminal adapter, be

sure to enter the subnet mask exactly as specified by your ISP. Usually, enter 255.255.255.0 here.

d. Gateway

You will enter this value when you set the a. DHCP/ AUTO IP setting above to Off.

Enter the IP address of the default gateway. If your DTR-7.4 is directly connected with an xDSL modem or terminal adapter, be sure to enter the gateway address exactly as specified by your ISP. If your DTR-7.4 is connected to a gateway/router, enter the IP address of the gateway/router.

DNS Server

e.1st

f.2nd

You will enter this value when you set the a. DHCP/ AUTO IP setting above to Off.

Enter the IP address of the DNS server. If your DTR-7.4 is directly connected with an xDSL modem or terminal adapter, be sure to enter the DNS address exactly as specified by your ISP.

When your Internet service provider provides only one DNS address, enter this address into “e. 1st.” When two or more DNS addresses are provided, enter both of them into “e. 1st” and “f. 2nd,” respectively.

Note:

After setting, allow approx. 2 seconds until the DTR-7.4 stores all of the data in the memory. Be sure not to turn off the power during that time otherwise the data will be lost.

Proxy Setup Sub-menu

Configure this item if your DTR-7.4 uses a proxy server to connect to the Internet.

Enter the proxy server settings exactly as specified by your ISP.

After the necessary settings are complete, press the Return button to go back to “5. Network Setup Menu,” select “Save Settings,” and press the Enter button to save the setting you made.

5-2.Proxy Setup

 

a.Proxy Server

:Off

b.Proxy Address

 

:

 

c.Proxy Port

 

:

0

Quit:[SETUP]

a. Proxy Server

Sets whether the DTR-7.4 connects to Internet radio station through proxy server or not.

On: Connects to Internet radio station through Proxy Server.

Off: Connects to Internet radio station without Proxy Server.

b. Proxy Address

Enter the domain name of the proxy server.

Making Full Use of Your DTR-7.4

77

Image 77
Contents DTR-7.4 Important Safety Instructions Precautions Table of Contents Table of Contents Supplied Accessories FeaturesInstalling the Batteries Before Using the DTR-7.4Using the Remote Controller Remote control sensor DTR-7.4 Standby indicatorFront Panels Index Parts and FacilitiesProtective caps Protective capsIndex Parts and Facilities Rear Panel Front Panel DisplayPRE OUT 18, 25 Digital IN/OUTAntenna Zone 2 OUTAmp Mode Remote ControllerRemote Controller Connecting the AM Loop Antenna Connecting AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shownConnecting an Outdoor AM Antenna Connecting AntennaConnecting an Outdoor FM Antenna Enjoying Home Theater How to use speakersAbout HomeTheater Important Points Regarding Speaker Placement Speaker PlacementSpeaker channels are colored as follows Connecting SpeakersUsing the Speaker Cable Labels AV Cables and Connectors Connecting a Television Monitor or Projector Monitor OUT Connecting to Audio/Video Equipmentflow of the video signals is as follows TV,PB projector Etc.PRDVD player Connecting to Audio/Video EquipmentSatellite tuner, television, or settop box Digital device DVD recorderConnecting Video Camera, etc. Video 5 Input Connecting a Compact Disc Player CDConnecting a Turntable Phono Ground wire earthUSA and Canadian models Australian model Connecting the Power Cords from Other DevicesSurround back right speaker Connecting Auxiliary Power AmplifierSurround right Center speakerConnections for Remote Control Connecting -compatible AV ComponentsPower on/ready function Power off functionTurning on the Power Connecting the PowerConnecting the Supplied Power Cord Turning on the Power from the Remote ControllerBasic Setup MenuMenu AdvancedΜNavigating Through the Setup Menu Setup MenuHardware Setup menu appears Hardware SetupDisplay the main menu Speaker Impedance Sub-menuSurr Back/Zone 2 Sub-menu Selecting the Appropriate Setting for Your ConnectionsRemote Setup Sub-menu TV Format Sub-menu Speaker SetupChanging the Remote Controller’s Control ID Speaker Distance Sub-menu Speaker Config Sub-menuPress the cursor button again Level Calibration Sub-menuUse the and cursor buttons to select Left To Change the Display of the Input Source from Tape to MD Configuring Input Settings Suitable for Your ConnectionsDigital Setup Sub-menu When NET AUDIO, FM, or Configuring Input Settings Suitable for Your ConnectionsInput Setup Digital Format Initial settings for each input sourceVideo Setup Sub-menu Multichannel Setup Sub-menu When NET AudioVideo Component VideoYour DTREnjoying Music or Videos with the DTR-7.4 Listening with headphonesBasic Operation Temporarily turning off the soundAdjusting the brightness of the front display Using the Sleep Timer remote controller onlyEnjoying Music or Videos with the DTR-7.4 Temporarily Changing the Speaker Output LevelsDTR-7.4 or the remote controller Switching the displayDialog norm DTR-7.4Press the Display button onAdjusting the bass and treble Changing the audio modeInput source you want to set Press the scroll wheel and thenListening Modes Using the Listening ModesUsing the Listening Modes Select the input source Selecting the Listening ModeStart playback on the device you Selected for inputRelationship between input source and listening mode THX Changes the listening mode to the THX listening modeListening to a stereo radio station FM mode Tuning Into a Radio StationListening to Radio Broadcasts Specifying Radio Stations by FrequencySelecting a preset radio station Presetting a Radio StationErasing a preset radio station Listening to Radio BroadcastsRecording a Source Recording a Source Select 2. Input Setup and then Input Setup BasicLabelling the Input Source Character Input Input source you want to nameInput Setup Basic Adjusting the Bass and Treble Sound Tone Control Audio Adjust BasicSetting the Various Sound Effects Sound Effect Audio Adjust BasicPress the scroll wheel, and then press the Setup button Input Setup AdvancedInput Setup and then press the Enter Press the Setup button to return to the main menuAdjusting the Audio Delay Delay Sub-menu Audio Adjust AdvancedInput Setup Advanced Setting the Low Frequency Effect Levels LFE Level Audio Adjust AdvancedDetailed Settings for Each Listening Mode Mono Sub-menuSurround Sub-menu Theater-Dimensional Sub-menuDolby Digital EX Dolby D Pro Logic II Music DimensionDTS-ES Pro Logic II Music PanoramaTHX Sub-menu Preference Advanced Volume Setup Sub-menuSetting the Background Color for OSD OSD Setup Adjusting the Headphone Volume Level Headphones LevelSwitching the OSD Position Preference AdvancedEnjoying Analog Multichannel Audio Playback Connecting to Devices with Analog Multichannel OutputSetup for Multichannel Output Using the tone control Changing the listening modeEnjoying Analog Multichannel Audio Playback Playing Analog Multichannel AudioUsing a Receiver/Integrated Amp in Zone Connecting ZoneUsing a Power Amp in Zone Using Only Speakers in ZoneEnjoying Music in the Remote Zone Performing the Settings for the Remote Zone ZoneEnjoying Music in the Remote Zone Setup Menu See If Remote Controller Signal Does not Reach Other ComponentsFrom connecting block Mini plug cable DTR-7.4 Output to the IR OUT terminalUsing the Remote Controller with Radio Frequency Connecting to an External Device with 12V Trigger Terminal Using an External Device with 12V Trigger TerminalConfiguring the 12V Trigger Terminal Press the Input button, and then rollInternet radio features FeaturesNet-Tune Features Enjoying Net AudioEnjoying Net Audio Connecting the DTR-7.4 to Your Ethernet NetworkInternet Internet radio Network Audio Server Modem To the WAN sideJKL Number/letter buttons Mode button 80CH/Disc button Play ButtonNetwork Setup Menu IP Address Sub-menu Proxy Setup Sub-menuMAC Address Sub-menu Input Setup MenuClient Sub-menu Press the Input button,Playback OSD Display Select ServerPlayback OSD Display Sub-menu Enjoying Internet Radio Erasing a preset Internet radio station Presetting Internet radio stationsChoosing a preset Internet radio station Turn on the Network Audio Server Mode button is illuminatedTurn on the DTR-7.4 While either the Input button norUse Buttons to select one From the menu Selecting a track listPlaying a music file at random Playing a music file repeatedlyDVD Mode Operating Onkyo Products Using the Remote ControllerOperating Onkyo Products Using the Connection Operating Onkyo Products Using the Remote Controller FR/FF / buttons CD ModePrevious/Next / buttons Mode button Eject button MiniDisc ModeCurrent track. The Next Select the next trackReverse Play button Tape ModeRewind/FF / buttons Remote Control Codes for an Onkyo DVD player Using the Remote Controller with Other ComponentsEntering a Remote Control Code Remote Control Codes Using the Remote Controller with Other ComponentsDVD DVD Player SAT satellite receiverJBL Following buttons control the DTR-7.4 Controlling a Satellite Receiver Controlling a VCRTV VOL Controlling a TV Controlling a Cable ReceiverStandby TV CH + Learning Commands from Another Remote Controller Making Macros Using MacrosAdding New Remote Controller Modes Editing Remote Controller ModesRunning Macros Naming MacrosReordering the Remote Controller Modes Type of mode you want to add,Mode before which you want to Deleting Remote Controller ModesAssigning Remote Controller Modes Resetting the Remote ControllerSymptoms Causes Remedies Troubleshooting GuideAM and FM stations Troubleshooting Guide101 If One of the Messages Shown Below Appears Amplifier Section Specifications104