Integra DTR-7.4 Changing the audio mode, Input source you want to set, Press the Audio SEL button

Enjoying Music or Videos with the DTR-7.4—Continued

Changing the audio mode

The DTR-7.4 accepts analog, digital and multichannel signals for audio input. You can choose which kind of signal to be played for a specific device.

1	Press the Input button, and then
	roll the scroll wheel to select the
	Input
	input source you want to set.

2	Press the scroll wheel and then
	press the Audio SEL button.
	Each time the button is pressed, the mode
	changes from “Auto” → “Multich” →
	“Analog” and back to “Auto.” The
	“Auto” audio mode is recommended for
	normal circumstances.
	Audio SEL
	Note:
	This procedure can also be performed by
	using the DTR-7.4’s input source buttons
	and Audio Selector button.

Auto (automatic detection): With this setting, the DTR-7.4 automatically detects whether the input signal is digital or analog. When a digital signal is not input, then the analog signal is played. This setting only appears if a digital input is selected for the Digital Input setting at Setup Menu → Input Setup Menu → Digital Setup Sub-menu (See pages 36-37).

Multich (Multichannel): Select this setting to play back the input from the component connected to the MULTI CH INPUT port. This setting only appears if “Yes” is selected for the Multichannel setting at Setup Menu → Input Setup Menu → Multichannel Setup Sub-menu (See pages 38).

Analog: Select this setting to play back the input from a source component connected to analog audio input jacks. With this setting, even if a digital signal is input from the same component, only the analog signal will be output.

Adjusting the bass and treble

You can adjust the bass and treble levels at the Setup Menu → Audio Adjust Menu → Tone Control Sub-menu (See page 54). The treble level affects the front left and right speakers and the center speaker. The bass level affects the front left and right speakers, the center speaker, and the subwoofer. For multichannel sources, these dials will not work if the tone control is set to “Direct” or “Pure Audio.”

Enjoying Music and Movies

43