Integra DTR-7.4 Enjoying Music in the Remote Zone, Connecting Zone, Using a Power Amp in Zone

Enjoying Music in the Remote Zone

Connecting Zone 2

With Zone 2 you can enjoy one input source in the main room and a different source in another room. With Zone 2 you can enjoy one input source in the main room and a different source in another room.

There are three connection methods: using a receiver/ integrated amp in Zone 2, using a power amp in Zone 2, or using only a pair of speakers in Zone 2.

Note:

ZONE 2 is analog only. Digital signals are not output. If no sound is heard from the selected input source, check if the component is connected to the analog inputs.

Using a Receiver/Integrated Amp in Zone 2

With this connection method you can use 7.1 surround sound in the main room and play a different AV source in Zone 2. Zone 2’s volume is adjusted on the receiver/inte- grated amp.

•Set the Surr Back/Zone2 setting to Zone 2 (see page 67).

•Use an RCA/phono audio connection cable to connect the DTR-7.4’s AUDIO ZONE 2 OUT L/R outputs to analog audio inputs on your receiver/integrated amp.

•Use a composite video connection cable to connect the DTR-7.4’s VIDEO ZONE 2 OUT to a composite video input on your Zone 2 TV.

Connect your Zone 2 speakers to the speaker terminals on your receiver/integrated amp.

Main Room
	TV
	DTR-7.4
R	L
	OUT	ZONE 2

Zone 2
	TV
	IN
R	L
	Receiver/
	integrated amp

Using a Power Amp in Zone 2

With this connection method you can use 5.1 surround sound in the main room and play a different source in Zone 2. Zone 2’s volume is adjusted on the DTR-7.4.

•Set the Surr Back/Zone2 setting to Zone 2 (see page 67).

•Use an RCA/phono audio connection cable to connect the DTR-7.4’s PRE OUT SURR BACK/ZONE 2 L/R outputs to the analog audio inputs on your power amp.

•Use a composite video connection cable to connect the DTR-7.4’s VIDEO ZONE 2 OUT to a composite video input on your Zone 2 TV.

•Connect your Zone 2 speakers to the speaker termi- nals on your power amp.

Main Room

TV

DTR-7.4

SURR
SURR R	L
BACK/
ZONE 2

Zone 2

Power amp

Using Only Speakers in Zone 2

With this connection method you can use 5.1 surround sound in the main room and play a different AV source in Zone 2. Zone 2’s volume is adjusted on the DTR-7.4.

•Set the Surr Back/Zone2 setting to Zone 2 (see page 67).

•Connect your Zone 2 speakers to the DTR-7.4’s SURR BACK/ZONE 2 SPEAKERS terminals.

•Use a composite video connection cable to connect the DTR-7.4’s VIDEO ZONE 2 OUT to a composite video input on your Zone 2 TV.

Main Room

TV

DTR-7.4

SURR

BACK/

ZONE 2

SPEAKERS

RL

Zone 2

66