Integra DTR-7.4 instruction manual Using an External Device with 12V Trigger Terminal, Want to set

Using an External Device with 12V Trigger Terminal

Connecting to an External Device with 12V TRIGGER Terminal

DTR-7.4

A	ZONE 2
	12V
	TRIGGER OUT

B

12V TRIGGER

Device A

12V TRIGGER

Device B

12V TRIGGER

The device located in the Zone 2

These outputs can be connected to the 12-volt trigger inputs on other components. They output 12 volts (100 milliamperes max). The ZONE 2 TRIGGER OUT out- puts 12 volts while the DTR-7.4 is in Zone 2 mode. The A and B outputs can be assigned to input sources, in which case, the assigned trigger output outputs 12 volts while the input source is selected.

Configuring the 12V Trigger Terminal

1	Press the Input button, and then roll the
	scroll wheel to select the input source you
	want to set.
2	Press the scroll wheel, and then press the
	Setup button.
	When the “Basic Menu” is displayed, select
	“→Advanced Menu” using the and cursor
	buttons and press the Enter button to display the
	“Advanced Menu.”
3	Use the	and	cursor buttons to select
	“2. Input Setup” and then press the Enter
	button.
	The “Input Setup” menu appears.
4	Use the	and	cursor buttons to select

“12V Trigger” and then press the Enter button.

The “12V Trigger” menu appears.

5 Use the and cursor buttons to select an item and then use the and cursor buttons to set the desired setting.

2-7.12V Trigger Setup

Input:DVD

a.Trigger	A	:On
b.Trigger	B	:Off
		Quit:SETUP

This sub-menu allows you to make the required settings to turn on the output from the 12V TRIGGER terminal to control another compo- nent or device with the DTR-7.4 for each input source.

a. Trigger A

On: Select to activate the device connected to the 12V TRIGGER A terminal when the input source is selected.

Off: Select when no device is connected to the 12V TRIGGER A terminal or you do not want the connected device to activate.

b. Trigger B

On: Select to activate the device connected to the 12V TRIGGER B terminal when the input source is selected.

Off: Select when no device is connected to the 12V TRIGGER B terminal or you do not want the connected device to activate.

6 Press the Setup button to return to the main menu.

Making Full Use of Your DTR-7.4

71