HOW TO USE THIS MANUAL
This manual contains the following sections:
-HOW TO USE THIS MANUAL
-SAFETY
-OPERATIONS
-MAINTENANCE
-PARTS LIST
The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.
Parts may be ordered from authorized Windsor dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual.
MODEL _____________________________________
DATE OF PURCHASE ________________________
SERIAL NUMBER ____________________________
SALES REPRESENTATIVE # ___________________
DEALER NAME ______________________________
OPERATIONS GUIDE NUMBER __________________
PUBLISHED ________________________________
Copyright 1995 Windsor Industries, Printed in USA
The model and serial number of your machine is on the bottom
The SAFETY section contains important information regarding hazard or unsafe practices of the machine. Levels of hazards is identified that could result in product or personal injury, or severe injury resulting in death.
The OPERATIONS section is to familiarize the operator with the operation and function of the machine.
The MAINTENANCE section contains preventive maintenance to keep the machine and its components in good working condition. They are listed in this general order:
-Hydraulics
-Directional Control System
-Throttle Neutral Position
-Main Broom
-Side Broom
-Belts
-Differential Drive
-Skirts
-Hopper
-Brakes/Tires
-Battery Information
-Hydraulic Schematic
-Hydraulic Troubleshooting
-Propelling Troubleshooting
-Machine Troubleshooting
-Service Schedule
The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information:
-REF – column refers to the reference number on the parts illustration.
-PART NO. – column lists the part number for the part.
-QTY – column lists the quantity of the part used in that area of the machine.
-DESCRIPTION – column is a brief description of the part.
-SERIAL NO. FROM – column indicates the first machine the part number is applicable to. When the machine design has changed, this column will indicate serial number of applicable machine. The main illustration shows the most current design of the machine. The boxed illustrations show older designs. If column has an asterisk (*), call manufacturer for serial number.
-NOTES – column for information not noted by the other columns.
NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts.
NOTE: The 98# on the lower left corner of the front cover is the part number for this manual.
QTFSG/QTFSD 98349 05/15/03 | |
|