Fuel Specifications

Fuel and Fuel Storage

Pellet fuel quality can fluctuate from manufacturer to manufacturer, and even from bag to bag.

Hearth & Home Technologies recommends using only fuel that is certified by the Pellet Fuels Institute (PFI).

Fuel Material

•Made from sawdust and/or other wood by-products

•Source material typically determines ash content

Higher Ash Content Material

•Hardwoods with high mineral content

•Bark and leaves as source material

•“Standard” grade pellets, corn and other biomass

Lower Ash Content Material

•Softwood; pine, fir, etc.

•Materials with lower mineral content

•“Premium” grade pellets

CAUTION! Do not burn fuel that contains an additive; (such as soybean oil)

•May cause hopper fire

•Damage to product may result

Read the list of ingredients on the packaging. If you are buying wood pellets, the only ingredient listed should be wood fiber or sawdust.

Clinkers

Minerals and other non-combustible materials, like sand, will turn into a hard glass-like substance when heated. Trees from different areas will vary in mineral content. For this reason, some fuels will produce more clinkers than others.

Performance

•Higher ash content requires more frequent mainte- nance.

•“Premium” grade pellets will produce the highest heat output.

•Burning pellets longer than 1-1/2 inches (38mm) can cause inconsistent feeding and/or ignition.

We recommend that you buy fuel in multi-ton lots whenever possible. However, we do recommend try- ing different brands prior to purchasing multi-ton lots, to ensure your satisfaction.

CAUTION! Tested and approved for use with wood pellets ONLY. Burning of any other fuel will void your warranty.

When changing from “Premium” grade pellets to a “Standard” or “Economy” grade fuel, the FEED AD- JUSTER will likely need adjusted to a lower setting. When under maximum demand, ensure there is no unburned fuel being pushed into the ash pan.

Storage

•Wood pellets should be left in their original sealed bag until ready to use, to prevent moisture.

•Do not store fuel within the specified clearance ar- eas, or in a location that will interfere with routine cleaning and maintenance procedures.

Moisture

Always burn dry fuel. Burning fuel with high moisture content takes energy to dry and tends to cool the appli- ance thus, robbing heat from your home. Damp pellet fuel could turn back into sawdust which does not flow properly through the feed system.

Size

•Pellets are either 1/4 inch or 5/16 inch (6-8mm) in diameter

•Length should be no more than 1-1/2 inches (38mm)

•Pellet length can vary from lot to lot from the same manufacturer

CAUTION

Tested and approved for use with wood pellets ONLY. Burning of any other fuel will void your warranty.

NOTICE

Hearth & Home Technologies is not responsible for stove performance or extra maintenance required as a result of using fuel with higher ash or mineral content.