2 retaining tabs |
on right and left |
sides |
Figure 8.10 Bend retaining tabs on left and right sides inward to hold brick in place.
Figure 8.11 Install the rear brick. Slide it in at an angle and place over the rear brick retainer. Hand bend retaining tabs up to hold brick in place. Push baffle towards back of firebox.
Rear brick retainers
Figure 8.12 NOTE: For the Hudson Bay Free Standing the upper rear brick retainer is used.
Reinstall the pilot shield with the screws removed in Figure 8.6. The pilot shield must be in place before operation of appliance.
F. Positioning the Logs
While still breakable, the logs do not become fragile until after the appliance is burned and they have cured. After curing, any handling must be done with care as breakage can easily occur.
PLEASE NOTE: Logs have been designed to work specifically with the burner of this appliance. Exact placement will ensure proper operation of your gas appliance and reduce sooting.
#3 | #4 |
#6 #5
Figure 8.13 Log Set.
#3 | #6 | #5 | #4 |
#1#2
Figure 8.14 Logs shown installed in firebox. Logs #1 and #2 are part of the burner pan and are numbered for reference only.
Figure 8.15 Install the left rear log (#3) over the locater pins in the burner pan.
|
|
|
|
Page 30 | 10/08 | ||