Trane Guide to Tracker Software and Troubleshooting Methods

®

Chapter 6 PC workstation wiring

Modem connection to PC workstation

To make a modem connection between the controller and a PC workstation, you need an RJ-11 cable (standard telephone cable).

Note:

The Trane Company reserves the right to support only selected modems for the Tracker PC workstation. This ensures proper operation of the Tracker software and makes troubleshooting easier, if a communication failure occurs.

Modem specifications are subject to change. For a current list of specified modems, contact your local Trane office.

1.Connect a RJ-11 cable (standard telephone cable) into the RJ-11 port on the bottom side of the controller (Figure 24 on page 48).

2.Connect the other end of the cable to a phone jack, a port on an exter- nal modem, or the PC workstation modem port (Figure 26 on

page 51). The incoming modem port is typically labeled “Line” or “Line in.”

Note:

Use the Tracker software to set the communication port that the modem will use.

50 BMTK-SVN01D-EN