Trane Building Automation System Connecting through a hub, Tracker Controller PC Workstation

®

Ethernet connection to PC workstation

Connecting through a hub

To make an Ethernet connection between the Tracker controller and a

Tracker PC Workstation through a hub, you need two CAT 5 patch cables.

1.Connect one end of the first CAT 5 patch cable to the RJ-45 Ethernet port on the bottom side of the Tracker controller (Figure 27 on page 52).

2.Connect the other end of the cable to an RJ-45 Ethernet port on the hub.

3.Connect one end of the second CAT 5 patch cable to an RJ-45 Ether- net port on the hub.

4.Connect the other end of the cable to the RJ-45 Ethernet port on the Tracker PC Workstation.

Figure 28. Tracker Ethernet LAN connection to a PC workstation through a hub

Tracker

Controller

Tracker

PC Workstation

	RJ-45	RJ-45
RJ-45 Ethernet	Ethernet	Ethernet
LAN port (back)	LAN jack	LAN jack

Hub

CAT 5	RJ-45 Ethernet
patch cable	LAN port (bottom side)

CAT 5 patch cable

BMTK-SVN01D-EN 53