Hearth and Home Technologies CASTILE-PMH1, CASTILE-MBK1 owner manual Castile Pellet Stove

Page 1

R

CASTILE PELLET STOVE

Owner’s Manual

Installation and Operation

Model:

CASTILE-MBK1

CASTILE-PMH1

CASTILE-CSB

CASTILE-CWL

Tested and

O-T L

Portland

Listed by

Oregon USA

C US

OMNI-Test Laboratories, Inc.

CAUTION

DO NOT DISCARD THIS MANUAL

• Important operating and •

Read, understand and

• Leave this manual with

maintenance instruc-

follow these instruc-

party responsible for use

tions included.

tions for safe installa-

and operation.

 

tion and operation.

 

DO

 

DISCARD

 

NOT

WARNING

Please read this entire manual before installation and use of this pellet fuel-burning room heater. Failure to follow these instructions could result in property damage, bodily injury or even death.

•Do not store or use gasoline or other flam- mable vapors and liquids in the vicinity of this or any other appliance.

•Do not overfire - If any external part starts to glow, you are overfiring. Reduce feed rate. Overfiring will void your warranty.

•Comply with all minimum clearances to com- bustibles as specified. Failure to comply may cause house fire.

CAUTION

Tested and approved for wood pellets and shelled field corn fuel only. Burning of any other type of fuel voids your warranty.

WARNING

HOT! DO NOT TOUCH.

SEVERE BURNS MAY RESULT.

CLOTHING IGNITION MAY RESULT.

Glass and other surfaces are hot during operation and cool down.

•Keep children away.

•CAREFULLY SUPERVISE children in same room as appliance.

•Alert children and adults to hazards of high temperatures.

•Do NOT operate with protective barriers open or removed.

•Keep clothing, furniture, draperies and other combustibles away.

CAUTION

Check building codes prior to installation.

•Installation MUST comply with local, regional, state and national codes and regulations.

•Consult local building, fire officials or authorities having jurisdiction about restrictions, installation inspection, and permits.

www.quadrafire.com

250-6422E

September 1, 2008

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Castile Pellet Stove Location Back side of left side panel Castile Pellet StoveTable of Contents Listing and Code Approvals Fire Safety Design, Installation & Location ConsiderationsGetting Started Appliance LocationInspect Appliance & Components and Pre-Use Check List Castile Pellet Stove Tools And Supplies NeededFire Risk Appliance Dimensions 3Dimensions and ClearancesCastile Pellet Stove Clearances to Combustibles UL and ULC Castile Pellet Stove Hearth Pad Requirements UL and ULC Exception for Horizontal InstallationsHearth Pad Requirements Chimney and Exhaust Connection 4Vent InformationVenting Termination Requirements Castile Pellet Stove Equivalent Feet of Pipe Pipe Selection ChartExample of 3 Elbow-Rear Vent Termination Calculaton See FigureAlcove 5Venting SystemsDegree Straight OutCastile Pellet Stove Through The Wall Through The Wall & Vertical Castile Pellet Stove VerticalAlternate Masonry Castile Pellet Stove Masonry6Mobile Home Outside Air Kit Instructions 7Appliance Set-UpRear Vent and Rear Vent to Top Vent Adapter Installation Top Vent Adapter InstallationInstalling the Top Vent Adapter Castile Pellet Stove Leg Leveling SystemOptional TOP LOG Castile Pellet Stove Thermostat Installation Fuel Size And Material General Operating Information 8Operating InstructionsFeed Rate Adjustment Instructions Fire CharacteristicsCastile Pellet Stove Before Your First Fire Starting Your First FireCastile Pellet Stove Iginition Cycles Frequently Asked QuestionsSymption TroubleshootingPossible Cause Corrective Action Page Symptoms Possible Cause Corrective Action 10Maintaining & Servicing Your Appliance Quick Reference Maintenance ChartFrequency Daily Weekly Monthly YearlyCleaning Ash Pan Cleaning Firepot with Cleaning Rod & Firepot ScraperCleaning Heat Exchanger Chambers & Drop Tube Ash Removal from FireboxCleaning the Exhaust Path Cleaning Beneath Heat ExchangerCleaning the Hopper Cleaning the GlassCleaning Exhaust Blower Requires No Lubrication Cleaning Convection Blower Requires No LubricationCleaning the Top Vent Adapter Preparing Firebox for Non-Burn Season Frequency YearlyConvection Blower Replacement Castile Pellet Stove High Ash Fuel Content MaintenanceRemove 6 screws Combustion Blower Combustion Blower ReplacementIgniter Replacement Glass Replacement Component Function Wiring Harness See .1 below Vacuum SwitchSnap Disc #1 Convection Blower 110F Snap Disc #2 Fuel Delivery Interrupt 250FCastile Pellet Stove Component Locations Description Part Number Castile Pellet Stove Exploded ViewsPart Description Service Parts Castile Pellet Stove Service Parts and AccessoriesCastile Pellet Stove Appliances AccessoriesDate of Service Performed By Description of Service Castile Pellet Stove Service and Maintenance LogCastile Pellet Stove Service and Maintenance Log Cont’d Castile Pellet Stove Homeowner’s Notes EPA Castile Pellet Stove Warranty PolicyHearth & Home Technologies Limited Warranty Cont’d Telephone T O T O

CASTILE-PMH1, CASTILE-CSB, CASTILE-MBK1, CASTILE-CWL specifications

Hearth and Home Technologies is renowned for its innovative and efficient heating solutions, among which the CASTILE line of products stands out. The CASTILE-CWL, CASTILE-MBK1, CASTILE-CSB, and CASTILE-PMH1 represent a blend of tradition and modern technology, designed to enhance home comfort while prioritizing energy efficiency and ease of use.

The CASTILE-CWL is a versatile unit featuring a sleek design that fits effortlessly into various decors. It incorporates an advanced combustion system that promotes cleaner burning, reducing emissions while delivering robust heat output. Its large hopper capacity minimizes the frequency of refueling, making it ideal for continuous heating. Additionally, the intuitive control panel offers user-friendly operation, allowing homeowners to set their ideal temperature easily.

Next, the CASTILE-MBK1 model boasts a unique design compatible with many different settings. It features enhanced insulation that ensures maximum heat retention and minimizes heat loss. The automatic ignition and advanced safety features ensure that use is not only efficient but also worry-free. Moreover, this model includes a programmable thermostat, giving users the ability to set heating schedules according to their preferences.

The CASTILE-CSB is particularly notable for its integration of modern technology with traditional aesthetics. Its compact design doesn’t skimp on performance, and its high-efficiency rating translates to lower energy bills. With features like a quiet operation system and a digital display for monitoring, the CASTILE-CSB is perfect for homes of any size. The model also offers customizable options for different finishes, allowing homeowners to match their heating source with their interior design.

Finally, the CASTILE-PMH1 rounds out this impressive lineup. This model is designed for reliable performance, providing consistent warmth with its state-of-the-art heat exchanger technology. The chimney venting system enables optimal heat distribution throughout the home while maintaining safety standards. Additionally, it includes features such as an easy-clean design and multiple heat settings, allowing users to tailor their heating experience.

In summary, Hearth and Home Technologies’ CASTILE product line offers an impressive combination of style, efficiency, and advanced features. Each model caters to specific needs while upholding the brand's commitment to quality and innovation, ensuring homeowners can enjoy a warm and inviting living environment.
Top Page Image Contents