![](/images/new-backgrounds/1055914/5591465x1.webp)
Electronic Control Settings 33
user preferences (continued)
Setting Temperature Display — Fahrenheit or Celsius
The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit:
1.Press USER PREF until you get to the
+-
2.Press hi or lo to toggle between the °C and °F display options.
3.Press START to accept the changes and go back to user preferences menu display.
AUDIO CONTROL
The Audio Control feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the default sounds and beeps. The volume of the beeps can also be adjusted.
To change the audio mode or audio volume:
1.Press USER PREF until you get to the AUd menu page.
+-
2.Press hi or lo to toggle between the available volume settings. AUd 5 for the highest volume setting to AUd 1 for the lowest volume. AUd OFF to disable the beeps.
3.Press START to accept the changes and go back to user preferences menu display.
Setting Continuous Bake or 12 Hour Energy Saving
The oven control has a factory preset
Changing between 12 hour energy saving and continuous bake:
1.Press USER PREF until you get to the E S menu page.
+-
2.Press hi or lo to toggle the energy saving setting on and off.
3.Press START to accept the changes and go back to user preferences menu display.
RE-SETTING TO DEFAULT FACTORY SETTINGS
The oven control can be set to return to its original factory settings. This includes: Setting the Clock ON/OFF to ON, Setting the clock display mode to 12h, Display mode to Fahrenheit, Setting the oven temperature adjustment to zero, Setting audio level to 5 and Enabling the 12h energy saving mode. Reseting the control also erase the My Favorite recipes.
To reset the oven control to its original settings:
1.Press USER PREF until you get to the rSt no menu page.
+-
2.Press hi or lo to select YES.
3.Press STARTto reset to default factory settings.