Venting
12" min. | Storm collar |
| |
| Flashing |
3" min. |
|
3" min. | 3" min. |
|
PL vent manufacturer's firestop spacer and support
No insulation or other combustible m a t e r i a l s a r e a l l o w e d w i t h i n 3" of the pellet vent pipe. Unless specified by the pipe manufacturer
(See Page 7 for corner installation clearances)
3" min.
Fig. 14
Minimum flue vent configuration
It is recommended that outside air be installed with this venting configuration to reduce smoke and creosote smell in the room in the event of power failure.
above ground level
#8 Installing through the ceiling
Through the ceiling vent, follow PL vent manufacturers recommendations when using wall and ceiling pass through. Note: Do not place joints within wall
Fig. 15
18" Min.
12" min. wall to outlet
36" min clearance to any combustible material
Fig. 16
14P61A Pellet Stove