Harman Stove Company P61A manual Maintenance, Minimizing Creosote, Glass Replacement

Maintenance

Minimizing Creosote:

Whenever wood is burned slowly, the potential exists for creosote to form in the venting. The chimney or venting system should be inspected periodically throughout the heating season to determine if a creosote buildup has occurred. If a significant layer of creosote has accumulated (3mm or more), it should be removed to reduce the risk of a chimney fire. A professional chimney sweep is recommended, since they would normally have the correct equipment to ensure proper creosote removal.

If you experience a fire in the venting system, turn the stove to "OFF" to allow the unit to shut down. Call the fire department, and be sure everyone is out of the residence. Before re-using the appliance, have it, and the venting system thoroughly inspected and replace any damaged components.

The glass in your Harman stove is a special ceramic glass.

•Do not abuse the glass by striking or slamming the door.

•Never burn the appliance if the door glass is cracked or broken.

•Replace only with Harman supplied glass.

Soot and/or fly-ash may accumulate on
the viewing glass, and will occasionally
need to be cleaned. Clean the glass		Glass
with a soft cloth and mild glass cleaner.	Retainers and screws
Do not clean the glass when hot,
and avoid the use of abrasive clean-
ers.
Glass Replacement
Carefully remove all remaining glass
and gasket materials prior to replacing
the glass.
Lay the door face down on a flat
surface. Remove the glass retainers
and screws. Apply the gasket material	Adhesive gasket
to the face of the new glass. Lay the
glass into the door, making sure that
the glass is contained within the chan-
nels and raised areas of the door itself.
Lay the glass retainers into position
and install the screws. Tighten each
screw evenly to avoid making any
stress points.

Door Frame

22P61A Pellet Stove