Acclaim Lighting 2490 installation instructions Introduction, Table of Contents, Accessories

Page 2

Resolute® Acclaim Woodburning Stove

Introduction

Thank you for choosing a Vermont Castings Resolute Acclaim.

Your stove is one of the finest available. It features high efficiency, non-catalytic performance, using space-age refractory material and the precisely calibrated delivery of air to a concentrated charcoal bed to promote secondary combustion in a controlled environment.

If treated properly and operated according to the guidelines in this manual it will provide years of safe, dependable, and economical heating.

The Resolute Acclaim is listed by OMNI-Test Laboratories of Portland, Oregon. The test standards are ANSI/UL-1482 and 737 for the United States and ULC S627 for Canada.

The Resolute Acclaim is listed for burning wood. Do not burn other fuels.

The Resolute Acclaim is listed and approved for installation in mobile homes only in the United States and only with use of Vermont Castings Mobile Home Installation Kit #3249.

The Vermont Castings Resolute Acclaim is in compliance with the standards set forth by the Federal Environmental Protection Agency, 40 CFR Part 60.532(b)(2), as stated on the permanent label attached to each stove.

In addition to directions on installation and operation, this manual includes directions on maintenance and assembly.

We recommend that you hire a professional solid fuel stove installer to install your stove, or to advise you on the installation should you attempt to install it yourself.

Save These Instructions.

Table of Contents

 

Specifications

3

Installation

4

Operation

17

Maintenance

24

Replacement Parts

29

Proposition 65 Warning: Fuels used in gas, wood- burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Accessories

Warming Shelf

 

#0064 Classic Black

#1357 Suede Brown

#1351 Sand

#1385 Biscuit

#1354 Ebony

#1387 Chestnut Brown

#1355 Bordeaux

#1390 Vt. Classic Green

#1356 Midnight Blue

#1395 Brown Majolica

#0184 Rear Heat Shield

 

#0246 Bottom Heat Shield

 

#0133 Sparkscreen

 

#3255 Outside Air Adapter (for 3” ducting)

#3249 Mobile Home Kit - includes: Rear and Bottom Heat Shields, Outside Air Adapter, Ducting and Leg Clips

#0574 Stove Surface Thermometer

#3421 Gasket Kit

 

#4360 Griddle Handle Kit

 

Short Legs

 

#0565 Classic Black

#0298 Vt. Classic Green

#0293 Brown Majolica

#2915 Bordeaux

#0295 Biscuit

#2916 Midnight Blue

#0296 Chestnut Brown

 

#0297 Ebony

 

2000893

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Resolute Acclaim Introduction Table of ContentsAccessories Specifications Resolute Acclaim ModelMasonry Chimneys InstallationWhat Kind of Chimney to Use Prefabricated Chimneys Chimney Connector GuidelinesDouble-wall Chimney Connectors Chimney SizeFreestanding Installations Single-wall Chimney ConnectorsSecuring the Single-wall Connector To a Masonry Chimney Wall Pass-Throughs Above a FireplaceThrough a Fireplace An approved wall pass-through for the United States Floor Protection for Fireplace Installation Floor ProtectionWall Shields Keep the Stove a Safe Distance From Surrounding MaterialsSafe Ways to Reduce Clearances Reversing the Flue CollarFireplace Installations 6mmChimney Connector Clearance Resolute Acclaim Clearance ChartParallel Installation Corner Stove Clearance Front Clearance To CombustiblesStove Installed Stove in Corner Parallel to Wall Top Exit, No Heat ShieldsMinimum Wall Shield Requirements for Common Installations Corner Parallel Installations Alcove Installations Construction RequirementsUnpack the Stove Install Stove LegsOperation Two Controls Operate the StoveTwo Rules For Success Use the Air Control Settings That Work Best for YouRemovable Andirons For Greater Front-Loading Convenience Burn Only High-Quality FuelAir Setting Air Control Position Primary Air SettingsHow to Build and Sustain a Wood Fire Starting and Maintaining a Wood FireReloading and Reviving a Wood Fire Surface Thermometer is a Guide to PerformanceRemove and Store Ash Safely Rules for Open Fire ViewingClear the Ash Frequently Draft Management Fuel Draft TestingCreosote Back-puffingClean the Exhaust Channels MaintenanceCleaning the Glass Care of the Cast Iron SurfaceRepair Missing Cement in Seams Adjust the DoorAdjust the Damper as Needed Avoid Damaging the GlassResolute Acclaim Gaskets on Moving Parts How to Replace GasketsReplace Broken Glass Immediately Replacing the Griddle Gasket Gaskets on Resolute Acclaim Stationary PartsReplacing the Door Gaskets Replace Broken FirebricksDaily Resolute Acclaim Maintenance ScheduleYearly Spring Cleaning Two MonthsResolute Acclaim Woodburning Stove Item Description Part NumberResolute Acclaim Woodburning Stove Ashlip Door LegWarranty Mhsc

2490 specifications

Acclaim Lighting has made a significant impact in the world of architectural and entertainment lighting with innovative solutions that cater to a wide array of applications. One of their standout products is the Acclaim Lighting 2490, a lighting fixture that exemplifies cutting-edge technology and high performance.

The Acclaim Lighting 2490 is primarily designed for use in both indoor and outdoor settings. Its robust construction ensures durability against various weather conditions, making it an ideal choice for architectural lighting, theatrical productions, and even large-scale events. One of the standout features of the 2490 is its high lumen output, allowing it to provide bright, effective illumination in any scenario.

Equipped with advanced LED technology, the 2490 offers exceptional energy efficiency without compromising brightness. The fixture utilizes high-quality LEDs that not only extend the lifespan of the unit but also minimize heat generation, making it a sustainable choice for long-term use. This energy-efficient operation translates to lower energy costs and reduced environmental impact.

The Acclaim Lighting 2490 boasts versatile color rendering, with RGBW capabilities that allow users to create a wide palette of colors. This feature is particularly beneficial for event lighting and architectural applications where mood and aesthetics play a crucial role. Additionally, the fixture supports DMX control, making it easy to integrate into existing lighting setups and enabling synchronized light shows or dynamic lighting transitions.

Another noteworthy characteristic of the 2490 is its adjustable beam angle. This adaptability provides users with the flexibility to focus light where it's needed most, whether for highlighting architectural features or creating immersive environments for theatrical performances.

Built with user-friendliness in mind, the Acclaim Lighting 2490 includes options for easy mounting and installation. Its lightweight design coupled with intuitive controls ensures that both professional lighting technicians and newcomers can operate it with ease.

Overall, the Acclaim Lighting 2490 stands as a testament to the brand's commitment to quality and innovation in lighting technology. With its combination of efficiency, versatility, and durability, it offers a comprehensive solution for a wide array of lighting needs, making it a preferred choice among lighting designers and professionals alike.
Top Page Image Contents