Inserting & Changing Needles
Change the needle regularly, especially if it is showing signs of wear and causing problems. For best sewing results always use SINGER® Brand Needles.
Insert the needle as illustrated as follows:
A.Loosen the needle clamp screw and tighten again after inserting the new needle. (1)
B.The flat side of the shaft should be towards the back. C/D.Insert the needle as far up as it will go.
Attention:
Turn power switch to off ("O") before inserting or removing the needle.
Needles must be in perfect condition. (2)
Problems can occur with:
A.Bent needles
B.Damaged points
C.Blunt needles
|
| D |
|
| A |
|
| B |
| C |
|
1 |
|
|
B | A | C |
2
49