Harman-Kardon SoundSticks III Wireless setup guide Easy Setup Guide, Design

Easy Setup Guide

Step 5. Plug power cord into power adapter.

Step 6. Plug power adapter into subwoofer.

Step 7. Plug power cord into wall receptacle.

Step 8. Push power ON/OFF button. Unit is on when LED is lit. Push the subwoofer volume knob/power ON/ OFF button. Unit is on when the LED is lit. Use the subwoofer volume knob to balance the subwoofer’s volume with that of the satellites.

Step 9. Adjust volume level by touching + or – button. Touching both the + and – buttons mutes the audio.

When muted, touching either button unmutes the audio.

		www.harmankardon.com
Symptom	Possible problem	Solution
No sound from subwoofer, only	Subwoofer volume control set at	Rotate subwoofer volume control clockwise until relative volume
satellites.	minimum.	level is appropriate.
No sound from satellites, only	Satellites not connected to	Check connection of satellites to subwoofer.
subwoofer.	subwoofer.
High frequencies sound dull.	Satellites not positioned properly.	Position and tilt (angle) loudspeakers toward listener. The sound from
		the satellites is very directional due to the four-element linear array
		design.

This product is intended to be supplied by a listed direct plug-in power unit marked “Class 2” and output rated 16V DC minimum 1.5 A.

5