Brother Computerized Embroidery Machine operation manual LCD button

————————————————————————————————————————————————————

■LCD button

When a specific pattern is selected, press this key and then, press to switch the display. The embroidery settings such as the specified character string and color are confirmed.

Press this key to change the thread settings.

Press this key to select or cancel programmed thread cutting.

Press or to adjust the thread tension.

Press or to change the thread density (alphabet and frame patterns only).

Press this key to adjust the pattern.

Press this key when you want to change the color character by character in character embroidery. Since the machine stops at the end of each character, the upper thread is changed as you embroider.

Press this key again to cancel multi- color.

2

The needle progresses one color or one stitch (if pressed continuously, 9 stitches to 20 stitches) at a time and changes the position for starting the embroidery. This is used when a specific color is not embroidered or when restarting the machine after power has been turned off in the middle of the operation.

Back one	Forward
color	one color
Back one	Forward
stitch	one stitch

• For details, refer to “Resewing” (page 65).

The position of the pattern within the embroidery frame can be checked, and the size and angle can be changed.

•For details, refer to “Adjusting the layout” (page 61).

Memo

zKeys that appear surrounded with a dotted line cannot be used.

Selecting Embroidery Patterns 51