Brother Computerized Embroidery Machine AThreadguide. the machine to the needle bar thread

GETTING READY ————————————————————————————————————————————

eRaise the presser foot lever, pass the end of the thread through the embroidery foot hole.

XThe upper threading is finished.

Now that the upper threading and the lower threading are finished, you are ready to start embroidering.

Note

zIf the needle is not raised, the needle threader cannot thread the needle. Be sure

to press (Needle position button) to raise the needle before using the needle threader.

Threading the needle manually (without using the needle threader)

When using special thread, thread with a thickness of 130/20 or thicker which cannot be used with the needle threader, thread the needle as described below.

aThreadguide. the machine to the needle bar thread

•For details, refer to “Threading the upper thread” (page 30).

bLower the presser foot lever.

1

aPressor foot lever

cPass the thread through the eye of the needle from front to back.

dRaise the presser foot lever, pass the end of the thread through the embroidery foot hole.

34